Shi Yan

High-performance bio-based wood adhesive derived from Camellia oleifera meal with long shelf life and excellent mold resistance

Zhengyong Yang, Shi Yan, Bengang Zhang, Hui Huang et autres

A green bio-based wood adhesive by utilizing a by-product (Camellia oleifera meal, CM) obtained during the processing of Camellia oil extraction, which was further combined with citric acid and glucose through a simple and convenient strategy. The resulting CM-based wood adhesive exhibited …

cn, Égypte, fr (code pays fourni par la source)

Laser scanning path planning based on LPBF molding AlSi10Mg stress analysis

Bo Zhang, Shi Yan

Abstract To reduce residual stresses and warpage in large parts molded by LPBF (Laser Powder Bed Fusion), this paper adopts numerical simulation analysis to partition the molding area for planning, and analyses the stress-strain under different scanning strategies when 3d printing molding …

cn (code pays fourni par la source)

Study on the anti-penetration performance and perforation failure of Ti/Al3Ti/Al-laminated target

Yuzhong Miao, Xuefeng Ding, Shi Yan, Yuan Du et autres

The numerical simulation of bullet penetrating Ti/Al3Ti/Al-laminated targets with different individual thicknesses at initial velocity of 800[Formula: see text]m/s and anti-penetration properties of the same-sized bullet under different initial velocities was carried out by Ansys/LS-DYNA. The implementation of the finite element model …

cn (code pays fourni par la source)

Enhanced superhydrophobicity of acrylic polyurethane coatings by femtosecond laser ablation

Xinjun Sun, Rui Pan, Jiayi Xu, Shuye Zhang et autres

cn (code pays fourni par la source)

Reaction characteristics of Al–Mg alloy fuels with heterogeneous oxidation shell structures

Jie Yao, Shi Yan, Junhui Liu, Zichao Wang et autres

cn (code pays fourni par la source)

Chip morphology’s effect on properties of PLA-based bamboo–plastic composites produced using hot-pressing

Hongyun Qiu, Jie-Fang Yang, Bengang Zhang, Jiali Zhu et autres

This study explored the effect of raw material morphology on the properties of bamboo–plastic composites produced using hot-pressing. To provide a reference for reducing the production cost and improve the product properties of the composites, polylactic acid (PLA)-based bamboo–plastic composites were prepared …

cn, kr (code pays fourni par la source)

Classification and properties of Bambusa blumeana fiber

Shi Yan, Bengang Zhang, Hongyun Qiu, Zhengyong Yang et autres

This study extracted Bambusa blumeana fiber using alkaline boiling and then applied double-roll pressing in order to develop it, explore the applications of its various parts, and improve its utilization potential. The results showed that the outer bamboo fibers are finer and …

cn (code pays fourni par la source)

Mechanical and Antibacterial Properties of Bamboo Charcoal/ZnO-Modified Bamboo Fiber/Polylactic Acid Composites

Chunlin Liu, Shuai Zhang, Shi Yan, Mingzhu Pan et autres

In this study, biodegradable bamboo fiber/PLA composites (BPCs) modified using bamboo charcoal (BC)/ZnO were prepared. The effects of BC/ZnO addition on the mechanical properties and antibacterial properties of BPCs were investigated. The chemical structure, microscopic morphology, and crystallization of the composites were …

cn (code pays fourni par la source)

Camellia oleifera shell powder and palm kernel meal as an environmentally-friendly, low-cost compound filler in MUF adhesive for plywood preparation

Zhengyong Yang, Zhigang Duan, Shi Yan, Haizhu Wu et autres

cn, Égypte (code pays fourni par la source)

Reaction Characteristics of Al–Mg Alloy Fuels with Heterogeneous Oxidation Shell Structure

Jie Yao, Shi Yan, Junhui Liu, Zichao Wang et autres

Reaction Characteristics of Al-Mg Alloy Fuels with Heterogeneous Oxidation Shell Structure

Jie Yao, Shi Yan, Junhui Liu, Zichao Wang et autres

cn (code pays fourni par la source)

PREPARATION OF Ni-Co/TiO2 CATALYSTS AND CATALYTIC PERFORMANCE IN AQUEOUS HYDROGENATION OF FURFURAL

Chen Cheng, Bao Wei, Lan Yi, Yaru Li et autres