Ahmed Soufiane Benosman

Development of a lightweight, eco-friendly self-compacting mortar based on polypropylene and limestone filler waste: Investigation of thermophysical and acoustic properties

Abdelmounaim Korichi, Karim Belmokretar, Abdelhak. Badache, Abdelmadjid Lasledj et autres

The construction sector faces major environmental challenges due to the increasing accumulation of plastic waste and limestone by-products. This study investigates the use of sand derived from polypropylene waste (PPSW) as a replacement for natural sand (0, 20, 40, 60 and 100) …

Algérie, sa (code pays fourni par la source)

Innovative use of recycled polyvinyl chloride waste in plaster mortar for eco-friendly construction: physico-mechanical, thermal, acoustic and hydric performance

Farid Brahim Houti, Ahmed Soufiane Benosman, Mohamed Mouli, Omar Taleb et autres

Algérie (code pays fourni par la source)

Analysis of thermally treated “plastic-pozzolanic” modified mortars and their mechanical properties

Mohamed Sid Ahmed, Abdelmoutalib Benfrid, Ahmed Soufiane Benosman, Mostefa Hacini et autres

The recycling of plastic waste in construction materials offers a potential pathway toward sustainability while improving thermal performance. This study examines mortars in which natural sand is partially replaced by thermally treated PET waste by a natural source (pozzolan). Three phases were …

Algérie (code pays fourni par la source)

Development of Eco-Friendly Composite Mortars for the Circular Economy and Sustainable Construction: Rheological, Thermo-Mechanical, Durability Characterization, and Environmental Impact Assessment (LCA)

Mohamed Sid Ahmed, Mostefa Hacini, Ahmed Soufiane Benosman, Omar Taleb et autres

Algérie (code pays fourni par la source)

Eco-friendly bentonite-based geopolymers: Effect of alkali concentration and silica fume incorporation strategy on microstructural, mechanical and thermal performance

Mekhnache Zakaria, Ali-Dahmane Tewfik, Kameche Zine-El-Abidine, Ahmed Soufiane Benosman et autres

es (code pays fourni par la source)

Enhancing thermal insulation and humidity control in composite plaster mortars with olive pomace waste: Experimental and numerical study

Imane Fatima Zohra Mesli, Houssem Hachemi, Ahmed Soufiane Benosman, Omar Taleb et autres

Algérie (code pays fourni par la source)

Innovative Composite Aggregates from Thermoplastic Waste for Circular Economy Mortars

Abdelhak Badache, Noureddine Latroch, Mostefa Hacini, Ahmed Soufiane Benosman et autres

This study investigates sustainable mortars using lightweight synthetic sand (LSS), made from dune sand and recycled PET bottles, to replace natural sand (0–100% by volume). This aligns with circular economy principles by valorizing plastic waste into a construction aggregate. LSS is produced …

Algérie, fr (code pays fourni par la source)

Promoting Circular Economy in Cementitious Materials: Per-Formance of Cementitious Materials Incorporating Synthesized Composite Aggregates from Recycled Plastic Waste

Abdelhak Badache, Noureddine Latroch, Mostefa Hacini, Ahmed Soufiane Benosman et autres

It is widely acknowledged that beverage consumption generates significant amounts of non-biodegradable polyethylene terephthalate (PET) bottle waste. It was shown that these wastes could be effectively incorporated into mortars for the construction of cleaner green buildings. The present work aims to study …

Algérie, fr (code pays fourni par la source)

Assessment of hygrothermal performance in plaster mortar composites incorporating polyvinyl chloride waste aggregates

Farid Brahim Houti, Houssem Hachemi, Ahmed Soufiane Benosman, Omar Taleb et autres

Algérie, tr (code pays fourni par la source)

Effect of Mix Design Parameters on the Properties of Dam Sediment/Slag-Based Geopolymer Mortars

Mohamed Salah Mouaissa, Hafida Marouf, Tewfik Ali-Dahmane, Ahmed Soufiane Benosman et autres

This study focuses on the use of dredged sediment (SD) from the dam for the synthesis of a geopolymer. The samples investigated in this work were prepared by mixing micronized and calcined sediment and ground granulated blast furnace slag (GGBFS), at different …

Algérie, fr (code pays fourni par la source)

Impact of industrial waste fillers in self-compacting mortars: A comparative analysis of mechanical performance

Ahmed Messaoud Djebara, Mohamed Mouli, Karim Belmokretar, Ramdane Chihaoui et autres

This study investigates the viability of utilizing non-biodegradable industrial waste streams specifically ground glass, crushed brick, and sanitary ceramics as alternative fillers in self-compacting mortars (SCMs). A conventional SCM mixture incorporating traditional limestone filler served as the control benchmark. The research assessed …

Algérie (code pays fourni par la source)

Enhancing Cementitious Materials: A Detailed Review of Bentonite’s Role in Optimizing Concrete Performance

Zakaria Mekhnache, Tewfik Ali-Dahmane, Zine-El-Abidine Kameche, Ivan Alhama-Manteca et autres

Cement manufacturing significantly impacts global CO₂ emissions, contributing around 8% due to its high energy demand and the calcination process in clinker production. To reduce this environmental impact, the industry is exploring sustainable alternatives by integrating supplementary cementitious materials (SCMs), which enhance …

es, Algérie (code pays fourni par la source)