Exploring the effect of femtosecond laser surface treatment on the bond strength of zirconia to metal brackets: an in vitro study
Rattachement africain : Égypte. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
OBJECTIVE: To investigate the effect of zirconia (Zr) surface treatment with different femtosecond laser (FS) wavelengths on the shear bond strength (SBS) of metal brackets to multilayer zirconia. METHODS: ) was applied to the first group, while the other three groups were treated with FS laser light at wavelengths of 385 nm, 800 nm, and 870 nm, respectively. Orthodontic metal brackets were bonded at the center of zirconia samples using universal bond and light-cured resin cement. Specimens were tested for SBS with a universal testing machine in occlusogingival direction at a crosshead speed of 0.5 mm/min until fracture. The adhesive remnant index (ARI) was registered, and surfaces were observed under stereomicroscope. Scanning electron microscopy (SEM) was utilized to analyze and compare the morphology of treated and untreated zirconia surface samples. RESULTS: The APA group showed the greatest SBS value (17.23 ± 2.02 MPa), with no significant difference from the FS with 800 nm group (15.07 ± 3.42 MPa) or the FS with 870 nm group (13.01 ± 2.74 MPa). The FS 385 nm group showed significantly the lowest SBS value (8.07 ± 1.26 MPa) with P = 0.0001. CONCLUSIONS: The femtosecond laser irradiation at 800 nm and 870 nm achieved comparable shear bond strength (SBS) to airborne-particle abrasion (APA), indicating its potential as an alternative zirconia conditioning method, although it did not surpass APA. Its effectiveness was highly dependent on the selected wavelength parameters.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Exploring the effect of femtosecond laser surface treatment on the bond strength of zirconia to metal brackets: an in vitro study
- Date Crossref
- 21/10/2025
- Éditeur
- Springer Science and Business Media LLC
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Ain Shams University Égypte (code pays fourni par la source)Université ou école supérieure
-
Beni-Suef University Laser Institute for Research and Application (LIRA) Beni-Suef University, Égypte (code pays fourni par la source)Université ou école supérieure
-
National Research Centre Égypte (code pays fourni par la source)Structure de recherche
-
Faculty of Dentistry Orthodontic Department Cairo, Égypte (pays nommé en fin d’affiliation)Université ou école supérieure
-
Oral and Dental Research Institute Fixed and Removable Prosthodontics Department Cairo, Égypte (pays nommé en fin d’affiliation)Structure de recherche
Ain Shams University (Égypte), Laser Institute for Research and Application (LIRA) — Beni-Suef University (Beni-Suef University, Égypte) et National Research Centre (Égypte), avec 2 autres affiliations. Pays d’affiliation : Égypte.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.