Experimental study on the shear strength of partially-encased composite beams with corrugated webs
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The partially-encased composite beam with a corrugated web (CWPEC) is an improved composite member, which combines the respective advantages of traditional partially-encased composite beams and corrugated web beams. However, understanding on the shear performance of such beams is still quite limited, leading to a lack of shear strength design methods. The shear behavior of CWPEC beams was investigated through experimental studies and finite element (FE) analysis. The effects of shear span-to-depth ratios and link diameters on load-bearing capacity, failure modes, and ductility were systematically analyzed. The experimental results showed that CWPEC1 to CWPEC3 (with shear span-to-depth ratios of 1 or 2) experienced shear failure, while CWPEC4 (with a ratio of 3) exhibited bending failure. With an increase in the shear span-to-depth ratio from 1 to 2 and subsequently to 3, the ultimate load dropped by 7.28% and 28.43%, respectively, whereas the displacement ductility coefficient increased from 1.371 to 3.254 and further to 8.413. Furthermore, increasing the link diameter from 8 mm to 10 mm enhanced the shear resistance by 8.91% and improved the ductility coefficient by 11.94%. Finally, based on the experimental findings, a shear strength design method for CWPEC beams was proposed, which demonstrated good agreement with the experimental results.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Experimental study on the shear strength of partially-encased composite beams with corrugated webs
- Date Crossref
- 01/07/2025
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Zhengzhou University pays non établi dans la noticeUniversité ou école supérieure
-
Beijing University of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Beijing University of Civil Engineering and Architecture pays non établi dans la noticeUniversité ou école supérieure
-
Shanghai University of Engineering Science pays non établi dans la noticeUniversité ou école supérieure
-
Shanghai Fire Research Institute pays non établi dans la noticeStructure de recherche
-
School of Civil Engineering pays non établi dans la noticeUniversité ou école supérieure
-
College of Architecture and Civil Engineering pays non établi dans la noticeUniversité ou école supérieure
-
School of Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Shanghai Jieyi Architectural Consulting Firm pays non établi dans la noticeInstitution
Zhengzhou University, Beijing University of Technology et Beijing University of Civil Engineering and Architecture, avec 6 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.