Investigation of Thermal Cutoff Energy for Accurate Analysis of High-Temperature Engineering Test Reactor
Rattachement africain : jp. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Abstract This study investigates the appropriate thermal cutoff energy for neutron transport calculations in the High-Temperature Engineering Test Reactor (HTTR). Using the Monte Carlo calculation code mvp3.0, the impact of changing thermal cutoff energy on the multiplication factor was evaluated for the single fuel element geometry of HTTR, focusing on variations in fuel and moderator temperatures at the beginning of life (BOL) and end of life (EOL). In the default model of mvp3.0, resonance scattering is approximated by the free-monatomic-gas model with constant cross section. Therefore, the impact of using the exact model for resonance scattering was additionally examined. In the free-monatomic-gas model, a thermal cutoff energy of 30 eV is at least required to maintain the multiplication factor error within approximately ±50 pcm for both BOL and EOL. In addition, the results show that the impact of using the exact model instead of the free-monatomic-gas model on the multiplication factor is more than 200 pcm in the 30–40 eV range where U-238 has large resonance at 37 eV, and the impact becomes less than 50 pcm above 40 eV. These results indicate that a thermal cutoff energy of at least 30 eV is necessary without considering the effects of the exact model, and the energy range up to the 37 eV resonance needs to be considered in the case of applying the exact model to obtain the saturated results on multiplication factor for HTTR.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Investigation of Thermal Cutoff Energy for Accurate Analysis of High-Temperature Engineering Test Reactor
- Date Crossref
- 04/08/2025
- Éditeur
- ASME International
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
The University of Osaka pays non établi dans la noticeUniversité ou école supérieure
-
Nagoya University pays non établi dans la noticeUniversité ou école supérieure
-
Mitsubishi Heavy Industries (Japan) pays non établi dans la noticeEntreprise
-
Graduate School of Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Osaka University pays non établi dans la noticeUniversité ou école supérieure
-
Ltd. Mitsubishi Heavy Industries pays non établi dans la noticeEntreprise
The University of Osaka, Nagoya University et Mitsubishi Heavy Industries (Japan), avec 3 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.