Energy and exergy analyses of a solar assisted milk powder spray dryer
Rattachement africain : pk, au, de. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
• Comprehensive thermal analysis for optimizing spray drying processes when integrated with solar energy for better efficiency. • Heating power consumption: 0.768 kW (electrical) and 0.327 kW (solar), with 30% solar energy contribution. • Polystyrene sheets on SAH sides reduced heat losses from 4.9 to 2.27 W/m 2 ·K, significantly improving system efficiency. In the current study a detailed thermal analysis of a solar assisted spray dryer has been presented. Various methods and strategies were used to analyse and estimate the effect of process improvements from optimal evaluation models (Inversion Temperature) to heat exchanger optimization (Pinch Analysis). The spray dryer was a Buchi B-290 design with a two-fluid nozzle, having a main air flow rate of 0.01 kgs −1 and varying nozzle tips to adjust droplet diameters. A solar air heater was designed and developed as a preheater to split the heating power consumption into 0.768 kW (electrical heater) and 0.327 kW (SAH). Addition of polystyrene sheets on the sides of the solar air heater, reduced heat losses from 4.9 to 2.27 W.m −2 K −1 . Using solar air heater, the ratio of electrical energy input to energy used in the spray drying reduced from 2.68 to 1.69, thus contributed 30 % to the overall energy input. The exergy analysis revealed that the maximum improvement potential exists in the condenser (0.233 kW) followed by the spray drying chamber (0.294 kW), the electric heater (0.152 kW), and the solar air heater (0.097 kW). The study provided a comprehensive thermal analysis helpful during the design optimization of spray drying processes when integrating with solar energy.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Energy and exergy analyses of a solar assisted milk powder spray dryer
- Date Crossref
- 01/01/2025
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
University of Faisalabad pays non établi dans la noticeUniversité ou école supérieure
-
University of Agriculture Faisalabad Department of Farm Machinery & Power pays non établi dans la noticeUniversité ou école supérieure
-
The University of Sydney pays non établi dans la noticeUniversité ou école supérieure
-
University of Kassel Department of Agricultural and Biosystems Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Water & Agriculture Division pays non établi dans la noticeInstitution
-
School of Chemical and Biomolecular Engineering pays non établi dans la noticeUniversité ou école supérieure
University of Faisalabad, Department of Farm Machinery & Power — University of Agriculture Faisalabad et The University of Sydney, avec 3 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.