Effect of Cu on Solidification Microstructure and Solidification Process in High Carbon High Speed Steel Type Cast Alloy
Rattachement africain : jp. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Effect of copper on solidification microstructure and solidification process were investigated for high carbon high speed steel type alloys (Fe-2.0%C-5%Cr-5%Mo-5%V-0~7.5%Cu in mass%). The microstructure of all as-cast specimens with different copper content is dendrite consisting mainly of primary γ, MC-γ eutectic and M2C-γ eutectic. In the copper-free specimen, the shape of dendrite is granular (or equiaxed), while in the copper added specimens, it is columnar, and the columnarization trend become more pronounced with increasing the amount of copper content. Furthermore, the secondary dendrite arm spacing decreased with increasing amount of copper content. The volume fraction of primary γ dendrite gradually decrease and MC-γ eutectic gradually increase with increasing of the amount of copper content. While the volume fraction of M2C-γ eutectic is approximately constant regardless of the amount of copper content. The concentrations of chromium, molybdenum and vanadium within microstructure were approximately constant regardless of the amount of copper content in any microstructures. While the concentration of copper within microstructure was higher in order of dendrite, MC-γ eutectic and M2C-γ eutectic compared with any copper content, and its order corresponds to the solidification prosses. These results suggest that copper tends to remain in the solid phase (that is dendrite) rather than redistribute to the liquid phase during solidification.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Effect of Cu on Solidification Microstructure and Solidification Process in High Carbon High Speed Steel Type Cast Alloy 高炭素高速度鋼系合金の凝固組織および凝固過程に及ぼすCuの影響
- Date Crossref
- 01/05/2024
- Éditeur
- Iron and Steel Institute of Japan
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Kyushu University Department of Materials pays non établi dans la noticeUniversité ou école supérieure
-
Nippon Steel (Japan) pays non établi dans la noticeEntreprise
-
Faculty of Engineering Technical Division pays non établi dans la noticeUniversité ou école supérieure
-
Department of Engineering and Applied Sciences pays non établi dans la noticeInstitution
-
Faculty of Science and Technology pays non établi dans la noticeUniversité ou école supérieure
-
ISIJ International pays non établi dans la noticeInstitution
-
Nippon Steel Rolls Corporation pays non établi dans la noticeInstitution
-
R & pays non établi dans la noticeInstitution
Department of Materials — Kyushu University, Nippon Steel (Japan) et Faculty of Engineering Technical Division, avec 5 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.