Communication—Controlling Etching of Germanium through Surface Charge Manipulation

Le résumé fourni par la source

Potassium hydroxide (KOH) aqueous solutions can effectively etch germanium. Etch rates were determined in an electrolytic etch cell. Electrically isolated Ge wafers were subject to an etch rate of 1.45 ± 0.07 nm min−1, increasing to 12.6 ± 0.2 nm min−1 when grounded, 97 ± 2 nm min−1 when biased at −0.9 V, and 138 ± 2 nm min−1 with periodic biasing. Results suggest that the previously reported limited etching in KOH is associated with the recombination of holes with electrons injected from the surface reaction. The results of this study demonstrate that changing the hole concentration through biasing is an effective tool to control electrolytic etch rates, enabling future selective etching processes for germanium.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.