Cracking Resistance of Steam-Cured Precast Concrete Using High Alite Cement with Modified Fly Ash
Rattachement africain : jp. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Cement with fly ash has rarely been used in Japan, mainly because its strength development is slower than ordinary Portland cement. In this research, the effect of the new type of fly ash (which was modified by the electrostatic belt separation method) with high alite (C3S) cement on cracking resistance of precast concrete prepared by steam curing was studied. The mechanical and shrinkage properties of the proposed fly ash concrete were compared with those of concrete made using OPC cement without fly ash. In order to study the cracking tendency of precast concrete with the proposed cement with fly ash, thermal stress analysis was conducted, taking into consideration the experimental data of concrete properties with the different concrete mix proportions. A standard precast concrete box culvert model was used in this 3D FEM analysis, and the distribution of temperature and relative humidity in the cross-section and induced restraint stress during and after steam curing were discussed. Steam-cured concrete with fly ash and high alite cement developed higher compressive strength on the first day of age than concrete with OPC. The proposed fly ash concrete developed high cracking resistance in the early days. On the other hand, the results showed that the drying shrinkage at later ages was the main cause of cracking.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Cracking Resistance of Steam-Cured Precast Concrete Using High Alite Cement with Modified Fly Ash
- Date Crossref
- 23/10/2023
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Ashikaga University Department of Civil Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Den-en Chofu University pays non établi dans la noticeUniversité ou école supérieure
-
Ltd. (Japan) DC Co. pays non établi dans la noticeEntreprise
-
Sumitomo Osaka Cement (Japan) pays non établi dans la noticeEntreprise
-
Taiheiyo Cement Corporation (Japan) pays non établi dans la noticeEntreprise
-
Tokyo Institute of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Graduate School of Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Central Research Laboratory pays non établi dans la noticeStructure de recherche
Department of Civil Engineering — Ashikaga University, Den-en Chofu University et DC Co. — Ltd. (Japan), avec 5 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.