Switched Tank Converter: Quasi-Resonant Regulation for Soft Start and Mismatch Mitigation Technique
Rattachement africain : it, ch. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
In recent years, there has been a significant increase in the power consumption of data centers. As a result, server rack architecture has shifted from using 12 V to higher voltage levels of 48–60 V. The conventional power delivery system in use involves two stages of dc–dc conversion, utilizing an unregulated first-stage converter followed by a regulated converter. Among the first-stage converter topologies, the 4-to-1 switched tank converter (STC) is highly employed due to its high efficiency and power density. However, the STC has the drawback of generating a large inrush current during the startup phase. To address this issue, typically an auxiliary element such as a buck converter, a hot-swap controller, or an eFuse is employed. Additionally, achieving the zero-current switching condition in both resonant tanks is challenging when a mismatch in the resonant frequencies is considered. This article proposes a novel control technique to mitigate the large inrush that does not involve the use of any additional element, boosting the power density. It also presents a strategy to minimize the mismatch in the resonant frequencies in an STC. The experimental results obtained from a 600-W prototype validate the effectiveness of these approaches.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Switched Tank Converter: Quasi-Resonant Regulation for Soft Start and Mismatch Mitigation Technique
- Date Crossref
- 01/12/2023
- Éditeur
- Institute of Electrical and Electronics Engineers (IEEE)
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
University of Udine DPIA pays non établi dans la noticeUniversité ou école supérieure
-
European Organization for Nuclear Research pays non établi dans la noticeStructure de recherche
-
Politecnico di Milano pays non établi dans la noticeUniversité ou école supérieure
-
EP pays non établi dans la noticeInstitution
-
Dipartimento di Elettronica pays non établi dans la noticeInstitution
DPIA — University of Udine, European Organization for Nuclear Research et Politecnico di Milano, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.