Effects of Gypsum and Limestone Powder on Fresh Properties and Compressive Strength of Concrete Containing Ground Granulated Blast Furnace Slag under Different Curing Temperatures

Le résumé fourni par la source

Usage of industrial by-products such as ground granulated blast furnace slag (GGBFS), gypsum, and limestone powder have gained prominence in concrete production. It is, therefore, very important to conduct research into the various materials and their attendant influence on properties of concrete at different ambient temperatures. This study focused on the slump, setting time, and compressive strength of concrete with GGBFS at a constant replacement ratio, in which different forms of gypsum, namely anhydrous and di-hydrate gypsum, were also added at different SO3 contents. Effect of addition of limestone powder was also investigated. The results of the tests indicated that both gypsum and limestone powder when added to a mix proportion containing GGBFS can improve slump and compressive strength of concrete. Anhydrous gypsum produced higher optimum compressive strength as compared with di-hydrate gypsum. An increase in SO3 content from gypsum contributed to strength development at early ages but reduced its long-term strength. Gypsum added to the mix delayed initial and final setting time. Limestone powder accelerated both initial and final setting times and contributed to increasing compressive strength after one day, thus three to seven days; however, the long-term strength was reduced. Curing temperature of concrete influenced strength development and the time required to remove formwork was determined for different mixtures using “maturity function”.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.