A hybrid mass damper system controlled by H control theory for reducing bending–torsion vibration of an actual building
Rattachement africain : jp. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
A pair of hybrid mass dampers has been installed on an actual 23-storey building located in Tokyo. The aim of the dampers is to counteract wind and smaller earthquake excited oscillations. H∞ control theory has been applied to control the dampers for reducing both bending and torsion vibrations simultaneously. For the design of the controller, identification parameters resulting from the forced vibration test of the building are adopted. The target of the controller performance is to reduce the vibration of first mode and to keep robust stabilization over the second or higher mode. From the results of forced vibration tests conducted after installation of the controller, it was confirmed that this system has proven control effect, largely satisfying what was aimed for in the design. Furthermore, system performance has been continually recorded during earthquakes, and analysis of the data has proved control effect. Copyright © 2001 John Wiley & Sons, Ltd.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- A hybrid mass damper system controlled by H control theory for reducing bending–torsion vibration of an actual building
- Date Crossref
- 01/11/2001
- Éditeur
- Wiley
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Maeda Corporation (Japan) pays non établi dans la noticeEntreprise
-
IHI Corporation (Japan) pays non établi dans la noticeEntreprise
-
Technical Research Institute Technology Division pays non établi dans la noticeStructure de recherche
-
Ishikawajima Harima Heavy Industries Co. Ltd Industrial Machine and Plant Development Center pays non établi dans la noticeEntreprise
Maeda Corporation (Japan), IHI Corporation (Japan) et Technology Division — Technical Research Institute, avec 1 autre affiliation.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.