Improved throughput of deep high-aspect-ratio trenches using split-beam laser ablation
Rattachement africain : us. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
A 20W 355nm DPSS Q-switched nanosecond pulse width laser, with external beam-splitting optics, was used to simultaneously ablate two 600μm deep, 140μm wide, 13.4mm long blind trenches in silicon using a five line wide cut strategy, achieving a 1.22x throughput improvement compared with a single-beam 20W laser configuration. Improved split-beam throughput was achieved because overhead time consisting of non-cut time during galvanometer retrace and turn-around movements and the time taken to ablate shoulder formations, were found to be approximately independent of laser power. With this split-beam approach, where two identical trenches are simultaneously cut, overhead time is split between the two trenches when cut time/die is calculated, halving the effective overhead time/die, and thereby improving throughput. Specific throughput improvement depends upon cut strategy, trench size, and insertion loss of the beam-splitting optics. Beam splitting optics consisted of a half-wave plate, Glan-laser polarizing prism, and mirror. Making use of the linear polarization characteristic of laser light, rotation of the half-wave plate was used to adjust the relative power in each beam, and thereby equalize the ablation rate of each beam. Adjustment of the mirror angle determined the separation between the two trenches.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Improved throughput of deep high-aspect-ratio trenches using split-beam laser ablation
- Date Crossref
- 26/05/2006
- Éditeur
- SPIE
- Type
- proceedings-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Hewlett-Packard (United States) pays non établi dans la noticeEntreprise
-
Hewlett-Packard Co. (United States) pays non établi dans la noticeInstitution
-
Hewlett Packard Co.#TAB# pays non établi dans la noticeInstitution
-
Hewlett Packard Singapore (Private) Ltd. (Singapore) pays non établi dans la noticeEntreprise
-
Hewlett Packard Singapore Pte Ltd. pays non établi dans la noticeEntreprise
Hewlett-Packard (United States), Hewlett-Packard Co. (United States) et Hewlett Packard Co.#TAB#, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.