F.C. Antico

Effect of Printing Direction of 3D-Printed Nylon Under Abrasive Wear Conditions

Francisco Briones, Bárbara Valverde, Ricardo Donaire, Álvaro González et autres

This study evaluates the effect of printing orientation on the wear resistance of 3D-printed nylon fabricated via Fused Deposition Modeling (FDM). We conducted abrasive wear resistance tests, thermal analysis, and microstructural characterization using scanning electron microscopy before and after wear testing. The …

cl (code pays fourni par la source)

Microstructural Changes and Property Variations in Concrete with Valorized Animal Fibers After One Year

S. Dosque, Jean‐Marc Tulliani, F.C. Antico

it, cl (code pays fourni par la source)

The fracture mechanical behavior of the interface between animal fibers, mortar, and earth matrices. A theoretical and experimental approach

F.C. Antico, J. Concha-Riedel, I. Valdivia, C. García Herrera et autres

cl, gb (code pays fourni par la source)

The Role of Animal Fibers on the Pore Structure of One-Year-Age Concrete

S. Dosque, Jean‐Marc Tulliani, Bernardino Chiaia, F.C. Antico

cl, it (code pays fourni par la source)

Mechanical strength, mass loss and volumetric changes of drying adobe matrices combined with kaolin and fine soil particles

J. Concha-Riedel, F.C. Antico, Susana López‐Querol

cl, gb (code pays fourni par la source)

Experimental evaluation of adobe mixtures reinforced with jute fibers

Gerardo Araya-Letelier, F.C. Antico, C. Burbano-García, J. Concha-Riedel et autres

cl, co (code pays fourni par la source)

Mechanical and damage similarities of adobe blocks reinforced with natural and industrial fibres

J. Concha-Riedel, F.C. Antico, Gerardo Araya-Letelier

ABSTRACT Adobe is an earthen-based material that consists of the use of a clayey soil and, most of the times, straw fibres to manufacture blocks that are afterwards sundried. This study reviews the use of three types of fibres: vegetal, industrial and …

Animal fibers as water reservoirs for internal curing of mortars and their limits caused by fiber clustering

F.C. Antico, Paula Rojas, Francisco Briones, Gerardo Araya-Letelier

cl (code pays fourni par la source)

Mechanical and damage similarities of adobe blocks reinforced with natural and industrial fibres

J. Concha-Riedel, F.C. Antico, Gerardo Araya-Letelier

Adobe is an earthen-based material that consists of the use of a clayey soil and, most of the times, straw fibres to manufacture blocks that are afterwards sundried. This study reviews the use of three types of fibres: vegetal, industrial and animal, …

cl (code pays fourni par la source)

Mechanical-Damage Behavior of Mortars Reinforced with Recycled Polypropylene Fibers

Gerardo Araya-Letelier, Pablo Maturana, Miguel Carrasco, F.C. Antico et autres

Commercial polypropylene fibers are incorporated as reinforcement of cement-based materials to improve their mechanical and damage performances related to properties such as tensile and flexural strength, toughness, spalling and impact resistance, delay formation of cracks and reducing crack widths. Yet, the production …

cl (code pays fourni par la source)

Effectiveness of Polypropylene Fibers on Impact and Shrinkage Cracking Behavior of Adobe Mixes

Gerardo Araya-Letelier, F.C. Antico, J. Concha-Riedel, Andres Glade et autres

cl, us (code pays fourni par la source)

Influence of Jute Fibers to Improve Flexural Toughness, Impact Resistance and Drying Shrinkage Cracking in Adobe Mixes

J. Concha-Riedel, Gerardo Araya-Letelier, F.C. Antico, Úrsula Reidel et autres

cl (code pays fourni par la source)