Yonggang Min

KAlF4 surface modification enhances high-voltage high-rate cyclability and thermal stability of 5 V-class LiNi0.5Mn1.5O4 cathode

Zihao Meng, Gen Li, Yizhao Chen, Yongli Deng et autres

Spinel LiNi 0 . 5 Mn 1 . 5 O 4 (LNMO) is a highly promising cathode material for next-generation lithium-ion batteries due to its high voltage platform (∼4.7 V vs. Li + /Li) and superior energy density. However, severe interfacial side …

cn (code pays fourni par la source)

Enhanced Gas Separation Performance of Carbon Molecular Sieve Membranes Derived from Polyimide/Polyaniline Blend Precursors

Shiyang Zhang, Jiongcai Chen, Mingwei Cai, Linjie Qiu et autres

Polyimide membranes are generally limited by the permeability–selectivity trade-off during gas separation, which significantly restricts their further development and practical applications. Carbon molecular sieve membranes derived from polyimide (PI) precursors via pyrolysis have attracted considerable attention due to their excellent molecular sieving …

cn (code pays fourni par la source)

Novel barbituric acid molecular rotors for dynamic viscosity assessment in liquid food

Junjie Chen, Haijian Meng, Xiaochuan Lin, Yichao Wen et autres

cn (code pays fourni par la source)

AIE-active anthraquinone-derived sonosensitizers with enhanced reactive oxygen species generation for ultrasonic biofilm eradication

Dongmei Deng, Junjie Chen, Haijian Meng, Yichao Wen et autres

) biofilms at low concentrations (15 µM). This work establishes a new paradigm for designing AIE-enhanced organic sonosensitizers and provides a robust platform for ultrasound-activated antimicrobial applications, with significant potential for translation into non-thermal sterilization technologies.

cn (code pays fourni par la source)

Smartphone-assisted low-cost paper-based colorimetric and fluorescent dual-response sensor for visual evaluation of food freshness

Junjie Chen, Yichao Wen, Haijian Meng, Lvxin Zhang et autres

A novel ICT-based probe enables rapid, visual detection of biogenic amines. Coupled with smartphone-assisted colorimetric analysis, it provides a portable method for on-site assessment of food freshness, distinguishing fresh from spoiled samples.

cn (code pays fourni par la source)

Facile Preparation of a Flexible Electrochemical Sensor based on PI/C-FeCu/PDA for Highly Sensitive Glutathione Detection

Rongtao Liu, Chunjing Tao, Dongling Yu, Hongyu Zhou et autres

cn (code pays fourni par la source)

High-efficiency ternary organic solar cells with reduced energy loss enabled by an asymmetric non-fused ring electron acceptor

Jingyang Xiao, Mingzhou Luo, Yawen Zheng, Yaocheng Jin et autres

cn (code pays fourni par la source)

Solid additive engineering for high-efficiency organic solar cells: categories, mechanisms, and perspectives

Wenlong Wu, Shuaikang Ren, Jingyang Xiao, Guichuan Zhang et autres

This review summarizes recent advances in solid additives (SAs) for high-efficiency organic solar cells (OSCs), focusing on their categories, working mechanisms, and future research directions for SA engineering to accelerate OSCs' commercialization.

cn (code pays fourni par la source)

Interpreting Molecular Descriptors for Glass Transition Temperature Prediction and Design of Polyimides

Tingting Cui, Heng Liu, Xin Liu, Yonggang Min

The rational design of polyimides (PIs) with targeted glass transition temperature (Tg) is crucial for advanced microelectronics applications. While data-driven approaches offer promise, there is a pressing need for models that are not only predictive but also physically interpretable, especially with limited …

cn (code pays fourni par la source)

A bio-based composite phase-change material composed of pineapple peel and polyethylene glycol for efficient thermal energy storage

Haoxin Lv, Yongshuang Xiao, Jiahui Lin, Yonggang Min et autres

cn (code pays fourni par la source)

A ratiometric fluorescent probe with a large emission shift for the detection of sulfur dioxide derivatives in live cells, foods and plant

Junjie Chen, Haijian Meng, Dongmei Deng, Yonggang Min

cn (code pays fourni par la source)

Flexible polyurethane-based phase change composites with ultra-fast curing and thermal management capabilities

Xinbo Zheng, Yongshuang Xiao, Zhaozhang Zhao, Chao Fang et autres

Phase change material (PCM) have several drawbacks, including liquid leakage, solid brittleness, low thermal conductivity and monofunctionality. In order to address these shortcomings, this study used polyurethane (PU) as the flexible packaging materials, palmitic acid (PA) as the phase change material, and …

cn, bd (code pays fourni par la source)