Corrado Sciancalepore

Disintegration Behavior in Industrial Conditions of Poly(lactic acid)/Poly(hydroxybutyrate- co -valerate) Blends

Vito Gigante, Corrado Sciancalepore, Róbert Várdai, Duccio Gallichi-Nottiani et autres

-valerate) (PHBV) blends by exploring the full compositional spectrum (neat polymers and three intermediate ratios), bridging the gap between degradation behavior, the underlying thermal and mechanical properties, and crystallinity. Extrusion and injection molding techniques were used as processing techniques, and they were …

it, hu (code pays fourni par la source)

PFAS and Microplastics: Are Biodegradable Microplastics Less Harmful to the Environment?

Sonia Gaaied, Leilei Zhang, Terenzio Bertuzzi, Lucrezia Lamastra et autres

The monitoring of environmental pollution has attracted growing attention to per- and polyfluoroalkyl substances (PFASs) due to their long persistence and resistance to natural degradation. Despite extensive research into the occurrence of PFASs in the environment, their interactions with biodegradable polymers remain …

it (code pays fourni par la source)

Factors determining the Enzymatic degradation of PLA/PHBV blends

Nóra Hegyesi, Róbert Várdai, Corrado Sciancalepore, Daniel Milanese et autres

hu, it (code pays fourni par la source)

Recycling Foundry Sands in Concrete: A Comparative Study on the Use of Green Sand and Chemically Bonded Sand as Partial Replacements for Natural Sand

Pietro Di Maida, Corrado Sciancalepore, Enrico Radi, Luca Lanzoni et autres

Currently, many foundries successfully reuse sand multiple times within their production cycle. However, when the sand can no longer be reused, it is disposed of, resulting in environmental damage and high disposal costs for the company. The present research aims to explore …

it (code pays fourni par la source)

FEM-based development of novel 3D-printable plastic direct coolers for power semiconductor modules

N. Delmonte, Davide Spaggiari, Corrado Sciancalepore, R. Menozzi et autres

In this work, we present novel 3D-printable plastic direct coolers for power modules. The main objective of the work is to identify highly efficient solutions for heat extraction in terms of thermal resistance and temperature uniformity, to reduce the thermomechanical stresses that …

it (code pays fourni par la source)

Boronate Esters Dynamic Networks for the Reduction of Mechanical Anisotropy in Vat 3D Printed Manufacts

Alex Bonacini, Corrado Sciancalepore, Daniel Milanese, Gabriele Drago et autres

High Resolution Image Download MS PowerPoint Slide Vat photopolymerization ( VP ) is a prominent 3D printing technique known for its high resolution and precision. However, mechanical anisotropy can limit the performance of printed structures by making their mechanical properties dependent on …

it, fr (code pays fourni par la source)

Sericin Electrodes with Self-Adhesive Properties for Biosignaling

Davide Vurro, Aris Liboà, Ilenia D’Onofrio, Giuseppe De Giorgio et autres

High Resolution Image Download MS PowerPoint Slide The combination of green manufacturing approaches and bioinspired materials is growingly emerging in different scenarios, in particular in medicine, where widespread medical devices (MDs) as commercial electrodes for electrophysiology strongly increase the accumulation of solid …

it (code pays fourni par la source)

Characterization of nonlinear optical absorption of 2D layered MXene films

Di Jin, Wenbo Liu, Linnan Jia, Yuning Zhang et autres

We experimentally investigate layer-dependent nonlinear optical absorption (NOA) of 2D Ti3C2Tx films at ~800 nm using the Z-scan technique. Their NOA at ~1550 nm is also characterized by integrating them onto silicon nitride waveguides.

au, cn, fr (code pays fourni par la source)

Production of Olefin-based Composite Materials by Recycling Discarded Carbon Fibres

Corrado Sciancalepore, Antonio Panico, Matteo Leonardi, Luca Collini et autres

This work shows the feasibility of incorporating pyrolysis-recovered carbon fibers into polypropylene matrix to develop composite materials combining sustainability and mechanical performance.

Production of Olefin-based Composite Materials by Recycling Discarded Carbon Fibres

Corrado Sciancalepore, Antonio Panico, Matteo Leonardi, Luca Collini et autres

This work shows the feasibility of incorporating pyrolysis-recovered carbon fibers into polypropylene matrix to develop composite materials combining sustainability and mechanical performance.

Development of an Eco-Friendly One-Part Alkali Activated Mortar with Blast-Furnace Slag: Some Preliminary Results

Laura Bergamonti, Elena Michelini, Claudia Graiff, Daniele Ferretti et autres

it (code pays fourni par la source)

Layer-dependent nonlinear optical absorption in 2D layered MXene films for hybrid integrated photonics

Di Jin, Wenbo Liu, Linnan Jia, Junkai Hu et autres

We investigate the layer-dependent nonlinear optical absorption of 2D Ti3C2Txfilms prepared by a transfer-free, layer-by-layer coating method. We characterize the MXene films with different thicknesses using the Z-scan technique. We also integrate the MXene films onto silicon nitride waveguides and characterize the …

au, fr, cn (code pays fourni par la source)