Min Zha

Microstructures and mechanical properties of aluminum alloy joint produced by friction stir welding

Yuxue Zhang, Hailong L. Jia, Yi-Hang Yang, Wei Liu et autres

The growing demand for lightweight materials in the automotive industry leads to the increased use of integrated die-cast aluminum (Al) alloys in structural components. However, the friction stir welding (FSW) behavior of these alloys remains inadequately understood. This study focuses on the …

Microstructures and mechanical behaviors of FSW 6082-T6 Al alloy joints

Pin-Kui Ma, Hailong L. Jia, Yuxue Zhang, Yihang Yang et autres

cn (code pays fourni par la source)

Metallurgical origin of dual-cracking mechanism in resistance spot welds of dissimilar aluminum alloys

Yuxue Zhang, Hailong L. Jia, Yi-Hang Yang, Wei Liu et autres

cn (code pays fourni par la source)

Determination of the Plastic Flow Stress Curve of Metal Based on the Data of Micro-Impact Intrusion of a Spherical Indenter

А. P. Kren, Min Zha, Г. А. Ланцман, Shenbao Jin et autres

by, cn (code pays fourni par la source)

Atomic-scale insights into the modification mechanism of trace Bi on eutectic Mg2Si in an Al-6Mg-2Si-0.2Mn alloy

Tao Gu, Hailong L. Jia, Min Zha, Pin-Kui Ma et autres

cn (code pays fourni par la source)

Atomic-scale cocoonlike interfacial segregation stabilizes the nanoprecipitates in a dilute Mg-Mn-Al-Ca-Ce alloy

Zhen-Ming Hua, Shenghua Wu, Min Zha, Yulong Zhu et autres

cn, hk, sg (code pays fourni par la source)

A brief review on stress corrosion cracking of aluminum alloys: Mechanisms, prevention, and future perspectives

Yajie Yang, Ya Wu, Shenbao Jin, Dawei Wang et autres

cn (code pays fourni par la source)

Impressive creep resistance in an additively manufactured Al-Mg alloy enabled by multiscale microstructure tuning

Hongmin Zhang, Yihao Qin, Jian Bing Peng, Weiye Zhang et autres

cn (code pays fourni par la source)

Micro-texture-mediated dynamic hetero-deformation enabling high strength-ductility in a dilute Mg-Al-Ca-Mn alloy

Siqing Wang, Tong Wang, Shi-Chao Wang, Jiarui Chen et autres

Micro-texture design of hard-/soft-oriented grains improves Mg alloys' mechanical properties, while strength-ductility trade-off persists due to insufficient early-stage strengthening from soft-oriented grains and later-stage strain coordination in hard-oriented grains. Here, a TD-spread basal-textured dilute Mg-1.27Al-0.38Ca-0.45Mn alloy architected by uniformly-mixed basal-/TD-/random-oriented grains was …

cn (code pays fourni par la source)

Superior strength-ductility synergy of Al-Si-Cu-Mg alloys achieved by regulating solute clusters and precipitates: Experimental validation and numerical simulation

Li-Wen Xue, Hailong L. Jia, Jinkai Wang, Min Zha et autres

cn (code pays fourni par la source)

Synergistic enhancement of strength and ductility of wrought dilute Mg–Al–Ca alloys via modifying Ca/Al ratio

Run Sen Jiang, Hailong L. Jia, Mengna Zhang, Xiao Li Zhou et autres

Dilute Mg–Al alloys have favorable formability but their strength is often constrained by the lack of second phase particles. In order to enhance the mechanical performance, strategies including Ca-alloying and adjusting the Ca/Al ratio have proven to be effective by introducing and …

cn (code pays fourni par la source)

Enhanced plasticity mediated by disclination-assisted accommodation and twinning-induced work hardening in an elliptical-textured Mg alloy

Zhang-Ting Hu, Yipeng Gao, Yizhen Li, Zhen-Ming Hua et autres

• Improved work-hardening capacity and ductility were achieved by tailoring a strong basal texture to a TD-spread elliptical texture through minute addition of yttrium into a Mg-Al-Zn-Mn alloy. • Systematic investigations on deformation-induced microstructural evolutions have been performed by combining the quasi-in-situ …

cn (code pays fourni par la source)