Laboratory Measurement of GCL Shear Strength
Rattachement africain : us. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
This paper discusses the laboratory measurement of internal and interface shear strengths of geosynthetic clay liners (GCLs). All relevant issues are addressed, including test apparatus, gripping/clamping, hydration, consolidation, shear displacement rate, and post-test measurements. The standard 300 x 300 mm direct shear box is expected to remain the apparatus of choice for GCL strength testing. A poor gripping/clamping system may cause progressive failure of a GCL specimen, resulting in erroneous peak and large displacement shear strengths. GCL specimens should be hydrated and consolidated to match expected field hydration and loading conditions. Consolidation stresses should be applied in small increments to minimize bentonite extrusion. The appropriate displacement rate during shear is an issue of continuing debate. Available data indicate that dry encapsulated GCLs and hydrated geomembrane/needle-punched GCL interfaces can be sheared at 1 mm/min. Peak internal shear strengths of hydrated GCLs generally increase withincreasing displacement rate although some key studies have produced contradictory results. Residual internal shear strengths of hydrated GCLs may increase or remain constant with increasing displacement rate. A maximum displacement rate of 0.1 mm/min. is recommended for hydrated GCL internal shear tests until this issue is resolved. Once a test is completed, the mode of failure should be recorded and GCL water contents should be measured. Shear stress-displacement relationships should be included as part of all GCL testing reports.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Laboratory Measurement of GCL Shear Strength
- Date Crossref
- 01/01/2004
- Éditeur
- ASTM International100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959
- Type
- book-chapter
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
The Ohio State University pays non établi dans la noticeUniversité ou école supérieure
-
University of Illinois Urbana-Champaign pays non établi dans la noticeUniversité ou école supérieure
-
OFS (United States) pays non établi dans la noticeEntreprise
-
Ohio State University 1 Associate Professor pays non établi dans la noticeUniversité ou école supérieure
-
University of Illinois at Urbana-Champaign 2 Professor pays non établi dans la noticeUniversité ou école supérieure
-
SGI Testing Services pays non établi dans la noticeInstitution
The Ohio State University, University of Illinois Urbana-Champaign et OFS (United States), avec 3 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.