Formulation–Application Interactions Under Simulated Very-Low-Volume UAV Spraying of Crop Protection Products

Le résumé fourni par la source

Unmanned aerial vehicles (UAVs), also referred to as unmanned aerial pesticide application systems (UAPASs), are increasingly used for crop protection applications because of their operational efficiency and precision. However, UAV spraying is typically conducted at very-low volumes (VLVs) (10–20 L ha−1), resulting in highly concentrated spray solutions that may alter formulation behavior relative to conventional ground applications. In this study, a total of nineteen commercially available herbicide, insecticide, and fungicide formulations representing multiple formulation classes were evaluated under UAV-relevant (10 L ha−1) and conventional ground application conditions. Tank-mix compatibility, sprayability, droplet size distribution, driftable fines, dynamic surface tension (DST), and droplet spreading were assessed. Tank-mix incompatibility was most frequently observed in mixtures containing emulsifiable concentrate (EC) formulations, with five of 11 commonly used tank mixes exhibiting severe incompatibility at UAV rates despite compatibility at conventional application volumes. Formulations containing suspended actives, including suspension emulsions (SEs), suspension concentrates (SCs), oil dispersions (ODs), and water-dispersible granules (WDGs), showed the greatest risk of filter and screen clogging, whereas EC and soluble liquid (SL) formulations exhibited acceptable sprayability. UAV-rate spray solutions generally produced comparatively finer droplet spectra than ground-rate solutions, increasing driftable fines by up to 36.6% depending on formulation type. DST decreased by 2.5–35.2% under UAV conditions, with the largest reductions observed for SC and EC formulations. Reduced DST was associated with increased droplet spreading, particularly for fungicide formulations, where droplet spreading increased up to 718.8% relative to ground-rate preparations. These results demonstrate that formulation behavior can differ substantially under VLV conditions and that formulation-specific evaluation of compatibility, sprayability, atomization characteristics, and surface-tension-dependent behavior is required when products are deployed through UAV spray systems.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.