Microstructures and properties of nickel-aluminum-bronze coating by laser wire additive manufacturing
Rattachement africain : cn, ca. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Purpose This study aims to investigate the microstructure, mechanical properties and corrosion resistance of nickel-aluminum bronze (NAB) coatings fabricated on Q235 steel using laser fused wire additive manufacturing. Design/methodology/approach The coatings were characterized using X-ray diffraction, electron backscatter diffraction and electrochemical analysis. Findings The main phases identified in the NAB coating are α-phase-Cu, κI-phase AlFe3, and κII-phase AlNi. The microstructure is fine, dense and uniform, with an average microhardness of 259 HV0.2. The average coefficient of friction and wear rate are 0.317 and 1.694 × 10–6g/(N·m), respectively. Corrosion tests show a corrosion potential of −0.21V and a corrosion current density of 6.201 × 10–7A/cm². The solid solution of Al and Ni in the coating enhances strength through solid solution strengthening. Grain refinement from Al and the formation of a dense oxide layer, along with the presence of the Ni-rich κII-phase, significantly improve the coating’s strength, wear resistance and corrosion resistance, contributing to its excellent overall performance. Originality/value A systematic investigation was conducted on the microstructural characteristics and mechanical behavior of the resulting coatings, and the corresponding strengthening mechanisms were further clarified.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Microstructures and properties of nickel-aluminum-bronze coating by laser wire additive manufacturing
- Date Crossref
- 28/08/2026
- Éditeur
- Emerald
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Bengbu Medical College pays non établi dans la noticeUniversité ou école supérieure
-
Anhui University of Science and Technology pays non établi dans la noticeUniversité ou école supérieure
-
Anhui University of Finance and Economics pays non établi dans la noticeUniversité ou école supérieure
-
Anhui Science and Technology University pays non établi dans la noticeUniversité ou école supérieure
-
Artificial Intelligence in Medicine (Canada) pays non établi dans la noticeEntreprise
-
Anhui Sanlian University pays non établi dans la noticeUniversité ou école supérieure
Bengbu Medical College, Anhui University of Science and Technology et Anhui University of Finance and Economics, avec 3 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.