Industrial Waste Upcycling for Modern Construction: SAW Slag-Incorporated Composites with Multifunctional Properties Against Biological Degradation

Résumé fourni par la source

This research investigates the potential for valorizing submerged arc welding (SAW) slag as a partial substitute for Portland cement in eco-efficient mortars. The research focuses on microstructural characterization, mechanical performance, and, innovatively, resistance to microbial adhesion by Escherichia coli. The residue was processed by grinding and incorporated at substitution levels of 5%, 10%, and 15% by weight. The mechanical results demonstrate that the 5% substitution (AM5%) showed the best performance, reaching 47.55 MPa at 28 days, an increase of approximately 20% compared to the reference sample. This improvement is attributed to the pozzolanic effect with the filling and refinement of the pore structure, in the production of the secondary C-A-S-H phase. In the bioreactor biological assay, the AM5% sample demonstrated a significant reduction in bacterial colonization adhering to the material’s surface, with values of 9.4 × 101 CFU/cm2. Scanning electron microscopy (SEM) analyses revealed that the denser surface, with lower porosity, hindered the anchoring of E. coli and the formation of biofilm. The study concludes that the use of 5% SAW slag not only improves the structural properties of mortars but also increases their durability in environments prone to biological contamination, such as sanitation systems, promoting a sustainable alternative for the management of industrial waste in civil construction.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.