The Impact of Powder Delivery Process Parameters on Spreading Behaviour in Powder Bed Fusion Additive Manufacturing
Rattachement africain : it, gb. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
In this study, the effects of spreading speed and bed temperature on powder spreading in the Laser-Beam Powder Bed Fusion (PBF-LB) process were investigated. A purposely developed image analysis method was used to evaluate powder spread quality. High-resolution macro images covering most of the powder layer (10×7 cm) were captured and processed to obtain a wavelet power spectrum to highlight the distribution of roughness wavelengths on the layer surface. Results showed that increasing spreading speed and bed temperature widened the spectral density distribution of roughness wavelengths. The Spreadability Index (SI), defined as the ratio of the median particle size to the dominant surface wavelength, decreased by 7% when the temperature rose from 25 °C to 80 °C at a spreading speed of 3 mm/s. At a constant temperature of 25 °C, increasing the spreading speed from 3 mm/s to 30 mm/s reduced the SI by 64%, highlighting the significant impact of spreading speed on powder quality.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
Où se fait cette recherche
-
University of Salerno Department of Industrial Engineering pays non établi dans la noticeUniversité ou école supérieure
-
University of Leeds Department of Chemical and Process Engineering pays non établi dans la noticeUniversité ou école supérieure
Department of Industrial Engineering — University of Salerno et Department of Chemical and Process Engineering — University of Leeds.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.