Aller au contenu principal
Accès ouvert déclaré 2026 article

Effects of air discharge modes on airflow organization and temperature uniformity inside automated high-bay cold store

0Citations signalées, ce qui n’est pas une note de qualité
3Institutions déclarées
2Pays d’affiliation déclarés

Rattachement africain : cn, cz. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

To quantitatively evaluate the influence of air discharge configuration on thermal uniformity and energy performance in automated high-bay cold stores, a three-dimensional CFD (Computational Fluid Dynamics) model was developed to systematically compare the airflow distribution and thermal performance under downward and horizontal air discharge modes of the air cooler. Taking the − 20 ℃ automated high-bay cold store as an example, the mathematical model was validated against measured values. Then, CFD simulations were conducted at four air mass flow rates of 12 kg/s, 24 kg/s, 36 kg/s, and 48 kg/s for the air cooler, and the study focused on evaluating differences in airflow organization efficiency and temperature uniformity between the two air discharge modes. The results demonstrate that downward air discharge fundamentally alters large-scale flow structure formation, suppresses stagnant zones, and enhances global convective heat transfer uniformity. At a lower air mass flow rate of 12 kg/s, the temperature non-uniformity under horizontal air discharge is 3 to 4 times higher than that under downward air discharge, while the latter achieves an average store temperature approximately 2.0 ℃ lower, indicating a pronounced energy-saving potential. With increasing air mass flow rate, temperature uniformity is improved for both modes. However, the downward air discharge mode consistently provides superior temperature gradient control across all operating conditions. This study demonstrates the dominant role of air discharge modes of air cooler in airflow distribution and temperature uniformity inside automated high-bay cold stores and provides quantitative guidance for energy-efficient design.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Effects of air discharge modes on airflow organization and temperature uniformity inside automated high-bay cold store
Date Crossref
10/08/2026
Éditeur
Springer Science and Business Media LLC
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Henan University of Technology pays non établi dans la notice
    Université ou école supérieure
  • Zhengzhou University pays non établi dans la notice
    Université ou école supérieure
  • Synlab Czech (Czechia) pays non établi dans la notice
    Entreprise
  • Henan Engineering Technology Research Center of Cold-Chain Logistics pays non établi dans la notice
    Structure de recherche
  • School of Energy and Intelligence Engineering pays non établi dans la notice
    Université ou école supérieure
  • School of Mechanical and Power Engineering pays non établi dans la notice
    Université ou école supérieure
  • Ltd Synear Food Co. pays non établi dans la notice
    Entreprise

Henan University of Technology, Zhengzhou University et Synlab Czech (Czechia), avec 4 autres affiliations.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Refrigeration and Air Conditioning TechnologiesFood Supply Chain TraceabilityAdsorption and Cooling Systems

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.