Optimal Slope Angles and Berm Configurations for Rockfall Hazard Reduction Using Discrete Element Modelling and Statistical Analysis
Rattachement africain : my, gb. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Construction on hilly terrains in Malaysia increases the risk of rockslides, which pose a threat to lives and infrastructure. Despite extensive studies on rockfall dynamics, the influence of slope angles on the destructive reach and kinetic energy (KE) of falling boulders remains unclear. This study aims to identify the slope angles that influence impact distance and KE across various slope geometries, providing valuable insights for protective design measures. Slope angles (ranging from 15º to 90º) and ratios, as defined by the Jabatan Kerja Raya Malaysia (JKR) standards, were analysed using the Discrete Element Method (DEM) and statistical analysis. The study took into account slope angles, slope ratios, and boulder properties. The results indicated that destruction distance peaks at a slope angle of 60°, with the most hazardous slopes occurring between 45° and 60°. KE increased significantly between 35° and 60°, with the near-vertical slopes (up to 90°) generate the highest energy due to greater gravitational forces. Slope ratios of 1:1 and 2:1 produce longer destruction distances and higher KE values, with the 2:1 ratio (63.43°) being particularly critical. Berms were found to effectively reduce both the destruction distance and KE, particularly at slope ratios of 3:1 and 4:1. These findings provide quantitative design guidance on critical slope angles and berm configurations for reducing rockfall hazards based on DEM modelling aligned with JKR slope design standards.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Optimal Slope Angles and Berm Configurations for Rockfall Hazard Reduction Using Discrete Element Modelling and Statistical Analysis
- Date Crossref
- 26/06/2026
- Éditeur
- Penerbit UTHM
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Tun Hussein Onn University of Malaysia pays non établi dans la noticeUniversité ou école supérieure
-
National University of Malaysia pays non établi dans la noticeUniversité ou école supérieure
-
Hospital Universiti Sains Malaysia pays non établi dans la noticeÉtablissement de santé
-
National Defence University of Malaysia pays non établi dans la noticeUniversité ou école supérieure
-
University of Technology Malaysia pays non établi dans la noticeUniversité ou école supérieure
-
CREATe Centre pays non établi dans la noticeStructure de recherche
-
Centre of Excellence for Engineering and Technology (CREaTE) pays non établi dans la noticeOrganisme public
-
Universiti Tun Hussein Onn Malaysia pays non établi dans la noticeInstitution
-
Universiti Kebangsaan Malaysia pays non établi dans la noticeInstitution
-
Universiti Pertahanan Nasional Malaysia pays non établi dans la noticeInstitution
-
Universiti Teknologi Malaysia pays non établi dans la noticeInstitution
Tun Hussein Onn University of Malaysia, National University of Malaysia et Hospital Universiti Sains Malaysia, avec 8 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.