Compatibility and Interfacial Bonding Mechanism Between Portland Cement and Alkali-Activated Materials in Gradient Cementitious Composites: A Comparative Study of Mixed and Layered Casting Methods
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
An innovative cement and alkali-activated gradient cementitious composite was fabricated via mixed and layered casting methods. The influence of casting method and mix proportion on mechanical performance was systematically investigated, and the compatibility and synergistic mechanisms were characterized by XRD, FT–IR, and SEM. Mixed casting resulted in severe incompatibility, with the compressive strength plummeting to 18.7 MPa, a 66.5% reduction compared to the single-component binders. In contrast, layered casting enabled compatibility and coupling between the gradient layers, imparting a pronounced synergistic strengthening effect. The optimal alkali-activated material-to-cement ratio was 8:2, achieving a compressive strength of 62.7 MPa, which is 12.4% higher than that of the single-component composite. Microstructural analysis revealed that, under layered casting, the alkali-activated component continuously consumed the cement hydration by-product Ca(OH)2 to form calcium aluminosilicate hydrate (C-A-S-H) gel, generating a synergistic reinforcement in the interfacial region and enhancing the overall performance of the composite.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Compatibility and Interfacial Bonding Mechanism Between Portland Cement and Alkali-Activated Materials in Gradient Cementitious Composites: A Comparative Study of Mixed and Layered Casting Methods
- Date Crossref
- 25/07/2026
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Anhui University of Science and Technology pays non établi dans la noticeUniversité ou école supérieure
-
Anhui Special Equipment Inspection Institute pays non établi dans la noticeInstitution
-
School of Civil Engineering and Construction pays non établi dans la noticeUniversité ou école supérieure
-
Special Equipment Inspection Institute of Anhui pays non établi dans la noticeStructure de recherche
-
Anhui Jiangong Changjiang Construction Investment Co. pays non établi dans la noticeOrganisation à but non lucratif
Anhui University of Science and Technology, Anhui Special Equipment Inspection Institute et School of Civil Engineering and Construction, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.