Influence of Aging Precipitation Kinetics on Mechanical Properties and Corrosion Behavior of the Al-1.1Cu-2.4Li-X Alloy
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The mechanical properties, intergranular corrosion, and exfoliation corrosion of T6- and T8-aged Al-1.1Cu-2.4Li-X alloys (high Li content, Cu/Li ratio ≈ 0.46) were systematically examined. Microstructural analysis shows that T8 aging produces a higher number density of T1 (Al2CuLi) precipitates and a higher number density, as well as a finer and more uniform distribution of δ' (Al3Li) compared to T6 aging. This results in yield and tensile strengths that are 90 MPa and 40 MPa higher, respectively, for the T8 condition. In terms of corrosion, the T6-aged alloy displays intergranular corrosion depths of 176.5-210.1 μm, while the T8-aged alloy exhibits much shallower depths of 67.2-95.8 μm. The inferior resistance to intergranular and exfoliation corrosion in the T6 temper is attributed to precipitation-free zones (PFZs) and secondary-phase particles at grain boundaries. Increasing T6's aging time reduces the PFZ width and thus improves corrosion resistance. Conversely, prolonged T8 aging causes a gradual decrease in corrosion potential and an increase in corrosion current density, linked to a higher density of T1 precipitates, which signifies increased corrosion susceptibility. These findings provide a reference for understanding corrosion mechanisms and improving the corrosion resistance of high-Li Al-Li alloys.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Influence of Aging Precipitation Kinetics on Mechanical Properties and Corrosion Behavior of the Al-1.1Cu-2.4Li-X Alloy
- Date Crossref
- 10/07/2026
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Central South University pays non établi dans la noticeUniversité ou école supérieure
-
China State Shipbuilding (China) pays non établi dans la noticeEntreprise
-
Ningxia University pays non établi dans la noticeUniversité ou école supérieure
-
School of Materials Science and Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Ltd. CSSC Qingdao Beihai Shipbuilding Co. pays non établi dans la noticeEntreprise
-
School of Chemistry and Chemical Engineering pays non établi dans la noticeUniversité ou école supérieure
Central South University, China State Shipbuilding (China) et Ningxia University, avec 3 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.