A Cellulose‐Derived Polymer Additive for Stabilizing Thick Cathodes in All‐Solid‐State Batteries
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
ABSTRACT All‐solid‐state batteries (ASSBs) offer enhanced safety and energy density over conventional lithium‐ion batteries. However, achieving high active material loading remains challenging due to poor interfacial contact from cold‐pressing and the incompatibility of solvent‐based processing with advanced solid‐state electrolytes. Herein, we report a cellulose‐derived polymer additive (CA‐MDI) that establishes intimate solid–solid interfacial contact while ensuring continuous electron/ion transport in the composite cathodes. The efficacy of CA‐MDI is ascribed to the urethane‐linked cellulose framework, which is synthesized via the polymerization of cellulose acetate (CA) and methylene diphenyl diisocyanate (MDI). The as‐constructed ASSBs incorporating a CA‐MDI‐modified LiNi 0.89 Co 0.055 Mn 0.055 O 2 cathode achieve a high areal capacity of 6.4 mAh cm −2 , delivering an initial discharge capacity of 136.6 mAh g −1 at 0.3C and retaining 91.1% of the capacity after 100 cycles, whereas additive‐free cells show rapid degradation. At a lower areal capacity of 1.8 mAh cm −2 , the CA‐MDI‐modified cell maintains 80% of its initial capacity for over 620 cycles at 1 C. The applicability of the CA‐MDI additive is further demonstrated using LiCoO 2 and Li‐rich layered oxide cathodes. These results show that a mechanically adaptive polymer additive can improve the cycling stability of thick composite cathodes and provide a useful approach for developing high‐energy‐density ASSBs.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- A Cellulose‐Derived Polymer Additive for Stabilizing Thick Cathodes in All‐Solid‐State Batteries
- Date Crossref
- 09/07/2026
- Éditeur
- Wiley
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Hefei National Center for Physical Sciences at Nanoscale pays non établi dans la noticeStructure de recherche
-
School of Engineering Science Division of Nanomaterials & pays non établi dans la noticeUniversité ou école supérieure
-
Solid State Batteries Research Center GRINM (Guangdong) Institute for Advanced Materials and Technology Foshan Guangdong People's Republic of China pays non établi dans la noticeStructure de recherche
-
Eastern Institute for Advanced Study Zhejiang Key Laboratory of All‐Solid‐State Battery Ningbo Key Laboratory of All‐Solid‐State Battery Eastern Institute of Technology Ningbo Institute of Digital Twin Ningbo Zhejiang People's Republic of China pays non établi dans la noticeStructure de recherche
Hefei National Center for Physical Sciences at Nanoscale, School of Engineering Science Division of Nanomaterials & et Solid State Batteries Research Center GRINM (Guangdong) Institute for Advanced Materials and Technology Foshan Guangdong People's Republic of China, avec 1 autre affiliation.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.