Time-Dependent Wellbore Stability Window of Clay-Rich Shales Exposed to Water-Based Drilling Fluid: A Tunisian Drilling Case Study

Le résumé fourni par la source

Wellbore instability in clay-rich intervals remains a major drilling challenge, even when the selected fluid density satisfies the conventional pressure window. This study evaluates delayed instability during exposure to a low-salinity water-based drilling fluid using outcrop-derived Aleg and El Haria materials as analogs for clay-rich Tunisian drilling intervals. Mineralogical, chemical, geotechnical, and shear strength data were integrated with a coupled stability analysis to link fluid exposure, pore pressure redistribution, effective stress modification, and hydration-induced strength degradation. The two materials exhibited contrasting hydro-mechanical behavior. El Haria is clay-rich, with 80% total clay mineral content, including 41% smectite and 47% illite/smectite mixed layers, and has a swelling pressure of 2112 kPa. Aleg is more carbonate-influenced, with 66% total clay mineral content, 28% calcite, and a lower swelling pressure of 576 kPa. Freshwater hydration strongly reduced the shear strength envelope; between approximately 15% and 45% water content, cohesion decreased by approximately 91% in Aleg and 70% in El Haria. The stability profiles show that El Haria reached rc/a = 1.10 after 0.3 h and the critical threshold of rc/a = 1.30 after 21.7 h, whereas Aleg remained close to rc/a = 1.03. This defines a practical temporal stability window for planning open-hole exposure during logging, casing, and cementing operations.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.