Vanadium Oxide Thin Films via the Epoxide Route : Tailoring Oxide Properties through Substrate and Thermal Treatment
Rattachement africain : ar, es. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
This work presents a novel synthetic method to produce vanadium oxides thin films with different crystallographic phases and temperature sensitivities, by using a single precursor solution and different processing conditions. The Epoxide Route was employed to homogeneously produce a V(III) hydroxide sol, as demonstrated using X‐ray absorption and scattering. Subsequently, films were prepared by spin coating sols aged for different times, showing that uniformity is achieved when the sols are deposited near the gelation point. The effect of the substrate and the annealing conditions over the identity of the obtained oxide was investigated by X‐ray diffraction. The findings indicate that pure V 2 O 5 can be synthesized through annealing in air, while pure VO 2 is formed under inert conditions, when both bare and silicon‐nitride‐passivated silicon substrates were used. On the other hand, oxides formation was inhibited on glass substrates, probably due to ion migration. Finally, the electrical properties as a function of temperature were assessed. The results show a significant change in resistivity for VO 2 thin films attributed to a well‐known structural phase transition, whereas V 2 O 5 thin films exhibited a thermally activated electrical behavior. The proposed methodology allows easily producing vanadium‐based thin films suitable for applications in devices that require temperature sensitivity.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé, mais le titre doit être comparé manuellement.
- Titre Crossref
- Vanadium Oxide Thin Films via the <i>Epoxide Route</i> : Tailoring Oxide Properties through Substrate and Thermal Treatment
- Date Crossref
- 29/06/2026
- Éditeur
- Wiley
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
National University of General San Martín pays non établi dans la noticeUniversité ou école supérieure
-
National Institute of Industrial Technology pays non établi dans la noticeOrganisme public
-
Consejo Nacional de Investigaciones Científicas y Técnicas pays non établi dans la noticeOrganisme public
-
Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas Departamento de Química pays non établi dans la noticeUniversité ou école supérieure
-
Universidad Nacional de La Plata pays non établi dans la noticeUniversité ou école supérieure
-
Tecnalia pays non établi dans la noticeInstitution
-
ALBA Synchrotron (Spain) pays non établi dans la noticeEntreprise
-
Comisión Nacional de Energía Atómica pays non établi dans la noticeOrganisme public
-
Instituto Nacional de Tecnología Industrial Centro de Micro y Nanoelectrónica del Bicentenario pays non établi dans la noticeStructure de recherche
-
Instituto de Calidad Industrial Universidad Nacional de San Martín San Martín Buenos Aires Argentina pays non établi dans la noticeStructure de recherche
-
Instituto de Tecnologías Emergentes y Ciencias Aplicadas (ITECA) pays non établi dans la noticeStructure de recherche
-
Departamento de Física de la Materia Condensada CAC pays non établi dans la noticeInstitution
National University of General San Martín, National Institute of Industrial Technology et Consejo Nacional de Investigaciones Científicas y Técnicas, avec 9 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.