Investigation of tribological behaviour of B 4 C–graphene glass fiber composites using Taguchi, multi-criteria decision making, and machine learning approaches
Rattachement africain : th, in, gb, my. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The current research has focused on developing epoxy-based glass fiber composites reinforced with boron carbide (B 4 C) and graphene (Gr) particles processed through a compression moulding process for enhanced tribological performance. Through Taguchi’s L 32 experimental design, the experimental layout has been prepared by varying material configuration, sliding speed, normal load, and sliding time to observe their effect on wear rate and coefficient of friction. To address the multi-response problem, criteria weighting have been evaluated through Shannon’s entropy and CRITIC techniques integrated with TOPSIS and CoCoSo MCDM methods. Both methods have identified the optimal condition for minimizing wear and CoF as the hybrid filler composite tested at 600 rpm, 20 N, and 4 min. Sensitivity analysis across the four weighting combinations indicated a strong correlation (≈0.9) between the CRITIC TOPSIS and CRITIC CoCoSo rankings. Multivariate ANOVA has ensured and emphasized the strong interaction of material configuration and speed over both the responses studied. The AdaBoost algorithm has exhibited superior predictive accuracy, with an R 2 of 0.99 among the machine learning models. SEM analysis revealed fiber breakage, matrix cracking, void formation, and debris formation. The findings establish the potential of composites developed with hybrid fillers for applications demanding good tribological performance.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé, mais le titre doit être comparé manuellement.
- Titre Crossref
- Investigation of tribological behaviour of B <sub>4</sub> C–graphene glass fiber composites using Taguchi, multi-criteria decision making, and machine learning approaches
- Date Crossref
- 20/05/2026
- Éditeur
- SAGE Publications
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
King Mongkut's University of Technology North Bangkok pays non établi dans la noticeUniversité ou école supérieure
-
Alliance University pays non établi dans la noticeUniversité ou école supérieure
-
University Alliance pays non établi dans la noticeUniversité ou école supérieure
-
Saveetha University pays non établi dans la noticeUniversité ou école supérieure
-
UCSI University Value Innovation and Entrepreneurship(CERVIE) pays non établi dans la noticeUniversité ou école supérieure
-
Nehru Institute of Technology pays non établi dans la noticeStructure de recherche
-
Saveetha Institute of Medical and Technical Sciences (SIMATS) pays non établi dans la noticeStructure de recherche
King Mongkut's University of Technology North Bangkok, Alliance University et University Alliance, avec 4 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.