Effect of a steady longitudinal magnetic field on the microstructure and elemental segregation of laser cladded GH3625 coating
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Laser cladding is characterized by rapid melting and solidification, often resulting in composition dilution, and elemental segregation, which limit further improvement of coating quality. In this study, GH3625 nickel-based alloy powder was laser-cladded onto 304 stainless steel under a steady longitudinal magnetic field (0–200 mT). The effects of different magnetic field were investigated on the macrostructure, microstructure, elemental distribution, phase composition, hardness, and tribological performance of the cladding layers. The influence of the magnetic field on molten pool dynamics was analyzed, focusing on the combined roles of Marangoni convection, thermoelectromagnetic convection, and magnetic braking. The magnetic field significantly altered convective behavior and solidification patterns. As the magnetic field strength increases, a transition inside the molten pool is observed from thermoelectromagnetic convection-dominated behavior to magnetically induced damping-dominated behavior. The cladding layer exhibited grain refinement followed by slight coarsening, with the dilution ratio and Fe content first increasing and then decreasing. At a magnetic field intensity of 200 mT, the degree of Nb enrichment in the Laves phase is the lowest. When the magnetic field reaches 200 mT, the cladding layer achieves optimal microhardness and wear resistance, with a hardness of 275 HV 0.2 and a wear loss of 5.5 mg.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Effect of a steady longitudinal magnetic field on the microstructure and elemental segregation of laser cladded GH3625 coating
- Date Crossref
- 01/04/2026
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Shandong University of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Changchun Discovery Sciences (China) pays non établi dans la noticeEntreprise
-
Jilin Province Science and Technology Department pays non établi dans la noticeOrganisme public
-
Changchun Institute of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Ningxia Academy of Agriculture and Forestry Sciences pays non établi dans la noticeOrganisme public
-
School of Mechanical Engineering Centre for Advanced Laser Manufacturing (CALM) pays non établi dans la noticeUniversité ou école supérieure
-
School of Agricultural Engineering and Food Science pays non établi dans la noticeUniversité ou école supérieure
-
Ltd Changchun Ruiguang Technology Co. pays non établi dans la noticeEntreprise
-
Ningxia Agricultural Mechanization Technology Promotion Station pays non établi dans la noticeInstitution
Shandong University of Technology, Changchun Discovery Sciences (China) et Jilin Province Science and Technology Department, avec 6 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.