Electro-Chemo-Mechanical Coupling Effects of Al 2 O 3 Coatings on Separators in High Energy Density Lithium Metal Batteries

Le résumé fourni par la source

Al 2 O 3 -coated separators ( e.g ., Al 2 O 3 /PE) are widely utilized in lithium batteries to enhance battery performance, however, the electrochemical role of the Al 2 O 3 coating remains unclear. Here, we reveal that the generally conceived “inert” Al 2 O 3 coating layer is electrochemically active, and it is lithiated to form a LiAlO 2 thin layer of 20 nm on the surface of Al 2 O 3 particles. The Al 2 O 3 coating and in situ generated LiAlO 2 spatially homogenize Li + transport and regulate Li + flux to enable uniform Li deposition. Moreover, the Al 2 O 3 layer helps to anchor solvent molecules via Lewis acid–base interaction, thereby facilitating the formation of a solid electrolyte interphase enriched with inorganic components derived from anions, particularly lithium fluoride (LiF). The regulation of Li + flux only acts in the battery with the Al 2 O 3 layer facing the anode, while it is absent when the Al 2 O 3 layer faces the cathode. The effect of anchoring solvent also becomes weaker for the Al 2 O 3 layer facing the cathode than facing the anode. Consequently, a 4.48 Ah LiNi 0.8 Co 0.1 Mn 0.1 O 2 ||Li pouch cell with Al 2 O 3 /PE separator and porous polymer electrolyte demonstrates stable cycling over 250 cycles at a high energy density of 452 Wh kg –1 . A 29 Ah LiNi 0.9 Co 0.05 Mn 0.05 O 2 ||Li pouch cell with an energy density of 528.9 Wh kg –1 is also demonstrated. These findings uncover the critical electro-chemo-mechanical roles of the generally thought “inert” Al 2 O 3 coating in enhancing the electrochemical performance of lithium metal batteries (LMBs), which provide scientific bases for utilizing ceramic coatings on conventional separators to boost the energy density of LMBs.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.