Fracture Behavior of Rocks with Different Grain Sizes Based on the Boundary Effect Model: Insights from AE and DIC

Le résumé fourni par la source

Rock fracture behavior is strongly influenced by grain size and boundary effects, which complicate the determination of fracture parameters and the interpretation of size-dependent failure. This study investigates the fracture behavior of sandstone and diorite within the framework of the boundary effect model (BEM) using three-point bending tests, acoustic emission (AE), and digital image correlation (DIC). By varying the prefabricated crack length, different values of the structural geometric parameters ae were obtained, and the fracture toughness KIC and tensile strength ft were identified by regression analysis. The results show that KIC = 0.6841 MPa·m0.5 and ft = 4.5625 MPa for sandstone, whereas KIC = 2.7233 MPa·m0.5 and ft = 21.8218 MPa for diorite. Increasing the prefabricated crack length reduces the peak load and prolongs the pre-peak damage evolution stage. Diorite, with a larger average grain size, exhibits higher AE energy release, a higher proportion of high-energy AE events, and a larger fracture process zone (FPZ) than sandstone. Moreover, the AE energy distribution along the crack propagation direction shows a distinct “three-stage” characteristic, consistent with the non-uniform distribution of local fracture energy gf predicted by boundary effect theory. The results indicate that BEM can reasonably characterize the fracture behavior of rocks with different grain sizes, and the identified material parameters can be used to construct a BEM-based structural failure curve for estimating nominal failure stress over a wider range of structural geometric parameters.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.