Integrated numerical and experimental investigation of spray lubrication parameters in bevel gears based on moving particle semi-implicit method
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
This study examines oil jet lubrication of an engine spiral bevel gear set using numerical simulation, analytical modelling, and experiments. A 3D Moving Particle Semi-implicit (MPS) model is built in shonDy software to describe the transient jet and free surface flow around the rotating gears. The numerical results are coupled with analytical expressions for frictional heat generation, elastic fluid dynamic film thickness, and convective heat transfer. This combined model yields the oil coverage on the tooth surfaces, the pressure distribution, and the local heat transfer coefficient. An orthogonal experiment is carried out on a dedicated test rig to measure torque loss and to validate the trends obtained from the simulations. The influence of injection distance, injection angle, nozzle diameter, and gear speed is studied. The results show that nozzle diameter and gear speed have the strongest effect on oil coverage, heat transfer, and torque loss. The injection angle mainly changes the distribution of oil and temperature, while the injection distance has a limited effect within the tested range. The integrated numerical and analytical approach, supported by experiments, provides a practical tool for the design and optimization of jet lubrication for spiral bevel gears. It is suitable for high-speed gearboxes.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Integrated numerical and experimental investigation of spray lubrication parameters in bevel gears based on moving particle semi-implicit method
- Date Crossref
- 23/03/2026
- Éditeur
- SAGE Publications
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Beijing Institute of Technology pays non établi dans la noticeUniversité ou école supérieure
-
State Key Laboratory of Vehicle NVH and Safety Technology pays non établi dans la noticeStructure de recherche
-
Changchun University of Science and Technology Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing pays non établi dans la noticeUniversité ou école supérieure
-
Changchun University pays non établi dans la noticeUniversité ou école supérieure
-
Key Laboratory of Vehicle Transmission pays non établi dans la noticeStructure de recherche
Beijing Institute of Technology, State Key Laboratory of Vehicle NVH and Safety Technology et Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing — Changchun University of Science and Technology, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.