Aller au contenu principal
Accès ouvert déclaré 2026 article

SnO₂–Fe₂O₃ doped TiO₂ nanocomposites for reactive black 5 dye remediation: Dual-mechanism adsorption supported by kinetic, thermodynamic, and statistical analysis

0Citations signalées, ce qui n’est pas une note de qualité
4Institutions déclarées
1Pays d’affiliation déclarés

Rattachement africain : sa. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

Doped TiO₂ nanocomposites were synthesized using co-precipitation method with different Sn and Fe doping levels (1%, 3%, 5%, and 7%) to remove Reactive Black 5 (RB5), a common anionic azo dye. The nanocomposite containing 5% dopant exhibited the highest adsorption capacity with a q max of 357.1 mg/g. Effects of pH (1–10), contact time (5–90 min), initial dye concentration (5–200 mg/L), and adsorbent dose (50–200 mg) were evaluated through batch adsorption experiments. At pH 3, 60 minutes of contact time, and 200 mg/L dye concentration, the highest removal (94.11%) was attained. Kinetic analysis shows that the pseudo-second-order model generated the best fit (R 2 = 0.999), indicating chemisorption is the rate-limiting step. Isotherm modelling showed that adsorption is well explained by the Freundlich (R 2 = 0.9832) and Langmuir (R 2 = 0.9642) models, while also showing data support that the Temkin and double-layer statistical models could be useful in the overall analysis. Thermodynamic parameters (ΔG° = −2.80 to −4.98 kJ/mol; ΔH° = +0.008 kJ/mol; ΔS° = +0.033 J/mol•K) showed that the process was both spontaneous and endothermic. A regeneration study was carried out for 10 cycles, and the nanocomposite was able to retain nearly 83% of its initial efficiency.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
SnO₂–Fe₂O₃ doped TiO₂ nanocomposites for reactive black 5 dye remediation: Dual-mechanism adsorption supported by kinetic, thermodynamic, and statistical analysis
Date Crossref
10/03/2026
Éditeur
Scientific Scholar
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • University of Ha'il pays non établi dans la notice
    Université ou école supérieure
  • Imam Abdulrahman Bin Faisal University Basic & Applied Scientific Research Centre pays non établi dans la notice
    Université ou école supérieure
  • Islamic University of Madinah pays non établi dans la notice
    Université ou école supérieure
  • King Fahd University of Petroleum and Minerals pays non établi dans la notice
    Université ou école supérieure
  • College of Science Department of Chemistry pays non établi dans la notice
    Université ou école supérieure
  • Faculty of Science Department of Chemistry pays non établi dans la notice
    Université ou école supérieure
  • King Fahd University of Petroleum & Minerals (KFUPM) Department of Chemistry pays non établi dans la notice
    Université ou école supérieure

University of Ha'il, Basic & Applied Scientific Research Centre — Imam Abdulrahman Bin Faisal University et Islamic University of Madinah, avec 4 autres affiliations.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Adsorption and biosorption for pollutant removalEnvironmental remediation with nanomaterialsAdvanced oxidation water treatment

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.