Role of vanadium in welding of flat products in high strength low alloyed steels: microstructure and mechanical properties
Rattachement africain : it, de. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The use of High Strength Low-Alloy (HSLA) steels in structural applications requires detailed analysis of their microstructure to optimize the strength and toughness of welded joints. During multi-pass welding, thermal cycling generates a complex heat-affected zone (HAZ) with subregions containing brittle phases that can compromise mechanical strength. This study evaluates the effect of vanadium and niobium additions on the HAZ microstructure in 15 mm thick S355 steel welds produced by robotic GMAW welding. The results reveal a heterogeneous microstructure with ferrite of several morphologies, bainite, and martensite/austenite (M/A) islands. The presence of vanadium reduces the solubility of carbon during phase transformations, favoring the formation of ultrafine precipitates (∼11 nm) and reducing the M/A phase in the high vanadium (0.1 wt%) variant. Nevertheless, the micro-alloyed variants improve mechanical strength (yield and ultimate strength) without loss of ductility or fatigue resistance, exhibiting a stress dissipation behavior that favors resistance to crack propagation.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Role of vanadium in welding of flat products in high strength low alloyed steels: microstructure and mechanical properties
- Date Crossref
- 01/01/2026
- Éditeur
- EDP Sciences
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
University of Perugia Engineering Department pays non établi dans la noticeUniversité ou école supérieure
-
Istituto Italiano della Saldatura pays non établi dans la noticeOrganisation à but non lucratif
-
RWTH Aachen University pays non établi dans la noticeUniversité ou école supérieure
-
Italian Institute of Welding pays non établi dans la noticeStructure de recherche
-
Vantage Alloys AG pays non établi dans la noticeInstitution
-
Steel Institute RWTH Aachen pays non établi dans la noticeStructure de recherche
Engineering Department — University of Perugia, Istituto Italiano della Saldatura et RWTH Aachen University, avec 3 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.