Aller au contenu principal
Accès ouvert déclaré 2026 article

In-situ observations of misfit dislocation motion in AlSb/GaSb dislocation filter layer structures

3Citations signalées, ce qui n’est pas une note de qualité
5Institutions déclarées
2Pays d’affiliation déclarés

Rattachement africain : de, fr. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

The dislocation dynamics in epitaxially strained GaSb/AlSb/GaSb heterostructures grown on a Si(001) substrate via molecular beam epitaxy have been studied by means of scanning transmission electron microscopy. The 100 nm-thick AlSb layer – intentionally inserted as dislocation filter – is partially relaxed by bending pre-existing threading dislocations of the GaSb buffer into the interface with AlSb, creating a complex network of misfit dislocations. In addition to the expected misfit dislocation lines along the orthogonal <110> directions, irregular curved lines are also detected. Plan-view lamellae of the as-grown heterostructure were annealed in-situ in the microscope at temperatures well above the growth temperature to observe the propagation and interaction of the dislocations in real time. It was found that the (thermally activated) motion of misfit dislocations occurs independently of their Burgers vectors within the interface plane, which is not one of the primary slip systems of zinc-blende crystal structure, and without affecting the threading dislocation configuration in the filter layer. This unusual dislocation motion at this later stage of plastic relaxation (already 50% of lattice mismatch is relieved in the as-grown heterostructure AlSb layer) can only be explained by a non-conservative dislocation climb process on the one hand, and a vacancy-assisted slip on the other hand as it was recently discovered using molecular dynamics modeling. The results provide deeper insights into the thermal activation of dislocations in epitaxially strained systems and reveal potential for re-examining the conditions of those epi-layers as dislocation filters .

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
In-situ observations of misfit dislocation motion in AlSb/GaSb dislocation filter layer structures
Date Crossref
01/03/2026
Éditeur
Elsevier BV
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Paul Drude Institute for Solid State Electronics pays non établi dans la notice
    Structure de recherche
  • Forschungsverbund Berlin pays non établi dans la notice
    Structure de recherche
  • Centre National de la Recherche Scientifique pays non établi dans la notice
    Organisme public
  • Université de Montpellier pays non établi dans la notice
    Université ou école supérieure
  • Institut d'Électronique et des Systèmes pays non établi dans la notice
    Structure de recherche
  • Paul-Drude-Institut für Festkörperelektronik pays non établi dans la notice
    Structure de recherche
  • University of Montpellier IES pays non établi dans la notice
    Université ou école supérieure

Paul Drude Institute for Solid State Electronics, Forschungsverbund Berlin et Centre National de la Recherche Scientifique, avec 4 autres affiliations.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Semiconductor Quantum Structures and DevicesAdvanced Semiconductor Detectors and MaterialsGaN-based semiconductor devices and materials

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.