Post-fire mechanical properties of 3D printed concrete under different cooling methods
Rattachement africain : cn, gb, hk. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
This paper presents the mechanical properties of 3D Printed Concrete (3DPC) exposed to different elevated temperatures. After exposure to temperatures ranging from 200°C to 600°C and subsequent cooling by either air or water, the compressive strength and splitting tensile strength of 3DPC were evaluated. The results indicate that higher temperatures lead to increased anisotropy in 3DPC. Furthermore, water-cooling results in more severe deterioration of strength compared to air-cooling, with the maximum differences in compressive and splitting tensile strengths between the two methods reaching 23.2 % and 29.8 %, respectively. Additionally, the incorporation of fly ash in 3DPC more effectively improves post-fire strength compared to cast concrete. Comparisons with existing design codes reveal that current codes lack accuracy in predicting the post-fire strength of 3DPC and exhibit relatively large dispersion. Moreover, re-curing of heated specimens after cooling was conducted to assess its effect on post-fire mechanical properties. Test results indicated that compressive strength increased by up to 46.5 %, splitting tensile strength increased by up to 98.2 %, and anisotropy was significantly reduced. This study is the first to quantify the strength recovery effect of re-curing on 3DPC, elucidate the influence of cooling methods on high-temperature deterioration, and provide essential data to support post-fire assessment, repair strategies for 3DPC, and the revision of relevant codes.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Post-fire mechanical properties of 3D printed concrete under different cooling methods
- Date Crossref
- 01/02/2026
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Shandong University pays non établi dans la noticeUniversité ou école supérieure
-
University of Manchester pays non établi dans la noticeUniversité ou école supérieure
-
Hong Kong Polytechnic University Department of Building Environment and Energy Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Edinburgh Napier University pays non établi dans la noticeUniversité ou école supérieure
-
School of Civil Engineering pays non établi dans la noticeUniversité ou école supérieure
-
School of Mechanical pays non établi dans la noticeUniversité ou école supérieure
-
School of Engineering and the Built Environment pays non établi dans la noticeUniversité ou école supérieure
Shandong University, University of Manchester et Department of Building Environment and Energy Engineering — Hong Kong Polytechnic University, avec 4 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.