Influence of Adverse Pressure Gradient on the Drag Reduction Characteristics of Riblets

Le résumé fourni par la source

The riblet surface is a passive turbulence drag reduction technology with promising aerospace application prospects. To investigate the drag reduction effects of riblets under flow conditions more representative of actual aircraft surfaces, this study establishes an adverse pressure gradient environment at moderate-to-high Reynolds numbers. Symmetrically arranged two testing plates with riblets’ surface and smooth surface, hot-wire anemometry is employed to measure the skin friction drag of both plates to get a direct measurement of the drag reduction rate. And the drag reduction mechanism is analyzed through burst events detection and coherent structure’s inclination angle. The measurement results indicate that the adverse pressure gradient itself leads to a reduction in wall friction, and the turbulent boundary layer velocity profile deviates from the standard logarithmic law, rendering the Clauser chart method unsuitable for estimating the friction velocity. The adverse pressure gradient contributes positively to the drag reduction rate of riblets, while the increase in Reynolds number in this experiment has no substantial effect. For the near wall structures, their asymmetrical movement of ejection and sweep and investigated by VITA. The significant decrease in burst frequency and increase in coherent structure inclination angle in the turbulent boundary layer over the riblet surface are identified as the primary reasons for reduced wall friction, with these changes being particularly pronounced under adverse pressure gradient conditions.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.