Design and evaluation of a novel pyridine-thiazole hybrid adsorbent as high-capacity adsorbent for methylene blue removal from water
Rattachement africain : Égypte, jp. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
This study explores the novel application of a pyridine-thiazole hybrid adsorbent, MPHT 4 , for the efficient removal of methylene blue (MB) from contaminated water. The adsorbent was synthesized via a high-yield route and characterized using 1 H/ 13 C NMR, IR spectroscopy, HRESI-MS, elemental analysis, SEM, and BET surface area measurements. SEM revealed a homogeneous morphology with low porosity, while BET analysis indicated a surface area of 68.83 m 2 /g and a total pore volume of 0.113 cm³/g, classifying the material as a Type IV isotherm with micropores. The adsorption efficiency of MPHT 4 was systematically evaluated, achieving 86.7% removal of 25 ppm MB at pH 7 with a dosage of 1.0 g/L within 60 min. Kinetic studies confirmed a pseudo-second-order mechanism, while equilibrium data best fit the Freundlich isotherm, indicating multilayer adsorption on a heterogeneous surface. Thermodynamic analysis revealed a spontaneous and exothermic process, supported by a negative ΔG° (− 18.39 kJ/mol) and a positive ΔH° (29.92 kJ/mol). The adsorbent exhibited excellent stability and reusability over six cycles, facilitated by electrostatic interactions between MB and the negatively charged surface (pHPZC = 7.8). These findings highlight MPHT 4 as a promising, high-capacity adsorbent for MB removal, combining structural robustness, optimal porosity, and efficient regeneration for practical wastewater treatment applications.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Design and evaluation of a novel pyridine-thiazole hybrid adsorbent as high-capacity adsorbent for methylene blue removal from water
- Date Crossref
- 07/11/2025
- Éditeur
- Springer Science and Business Media LLC
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Damanhour University Égypte (code pays fourni par la source)Université ou école supérieure
-
Tokyo Institute of Technology pays non établi dans la noticeUniversité ou école supérieure
-
City of Scientific Research and Technological Applications Égypte (code pays fourni par la source)Structure de recherche
-
Faculty of Science Chemistry Department Égypte (pays nommé en fin d’affiliation)Université ou école supérieure
-
Institute of Science Tokyo Department of Civil and Environmental Engineering pays non établi dans la noticeStructure de recherche
-
Environment and Natural Materials Research Institute (ENMRI) Égypte (pays nommé en fin d’affiliation)Structure de recherche
Damanhour University (Égypte), Tokyo Institute of Technology et City of Scientific Research and Technological Applications (Égypte), avec 3 autres affiliations. Pays d’affiliation : Égypte.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.