Study on Ballistic Performance of a Sandwich Composite Plate With Biomimetic Tendon Filament Bundles ( SCP ‐ BTFB ) Considering Materials and Thickness
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
ABSTRACT In the field of protective equipment, traditional sandwich composite panels face challenges in balancing ballistic performance and lightweight properties, with core materials' insufficient energy absorption and structural stability limiting their use. Previous studies showed sandwich panels with biomimetic tendon filament bundles (SCP‐BTFB) have good energy absorption potential, but the effects of core material and thickness on ballistic performance remain unclear. This study tested SCP‐BTFB's ballistic performance using five fibers (carbon, PBO, basalt, UHMWPE, aramid) and two core thicknesses (10 mm, 15 mm) with 1951‐type lead bullets at ~445 m/s. Results show basalt core panels have the highest energy absorption ratio (15 mm: 49.39%), due to the most pushed‐out filament bundles and largest damage volume (4.2cm 3 ). For specific energy absorption (SEA), core thickening's energy gain is offset by weight, making 15 mm panels generally less efficient than 10 mm ones. However, their SEA (2.6–4.17 J/g) is much higher than previous studies. This work confirms basalt's advantages as BTFB core, aiding high‐performance protective composite optimization for lightweight bulletproof equipment and armor.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé, mais le titre doit être comparé manuellement.
- Titre Crossref
- Study on Ballistic Performance of a Sandwich Composite Plate With Biomimetic Tendon Filament Bundles ( <scp>SCP</scp> ‐ <scp>BTFB</scp> ) Considering Materials and Thickness
- Date Crossref
- 28/10/2025
- Éditeur
- Wiley
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Zhongyuan University of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Beijing Institute of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Shandong Institute of Metrology pays non établi dans la noticeStructure de recherche
-
Chengdu Organic Chemicals (China) pays non établi dans la noticeEntreprise
-
Shandong Institute of Non‐Metallic Materials Jinan China pays non établi dans la noticeStructure de recherche
-
High‐Tech Organic Fibers Key Laboratory of Sichuan Province Chengdu China pays non établi dans la noticeStructure de recherche
Zhongyuan University of Technology, Beijing Institute of Technology et Shandong Institute of Metrology, avec 3 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.