Optimization of Fine Milling Process Parameters for Small Impeller
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Addressing the issues of surface machining quality and residual stress in small impellers, the outward opening integral small impeller was selected as the key research object, and the main evaluation indicators of the surface quality of the experiment were set as the surface roughness and residual stress. The finite element simulation technology was used to analyze how the process parameters can affect the residual stress and outer surface roughness of the small impeller. After obtaining the results, the genetic algorithm was used to optimize it to obtain the optimal combination of process parameters. The surface roughness is reduced by 34.2%, and the residual stress is reduced by 28.6%, and at the same time, proved the feasibility of the optimization of the process parameters. The numerical control machining test of the small impeller was carried out to verify the feasibility and accuracy of the process parameter optimization.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Optimization of Fine Milling Process Parameters for Small Impeller
- Date Crossref
- 27/10/2025
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Xi'an Technological University pays non établi dans la noticeUniversité ou école supérieure
-
Guangxi Research Institute of Chemical Industry pays non établi dans la noticeStructure de recherche
-
School of Mechatronic Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Guangxi Research Institute of Mechanical Industry Co. pays non établi dans la noticeStructure de recherche
Xi'an Technological University, Guangxi Research Institute of Chemical Industry et School of Mechatronic Engineering, avec 1 autre affiliation.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.