Examination of electrical conductivity, thermal stability, tensile strength and elongation of PA6/CNT/Clay nanocomposite fabricated by 3D printing
Rattachement africain : in, om, jo, iq, bd. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The aim of present paper is to fabricate the Polyamide 6/Carbon nanotubes/Clay (PA6/CNT/Clay) nanocomposites by using 3D printing and investigate the electrical conductivity, thermal stability, tensile strength and elongation of printed samples. Taguchi method and grey relational grade analysis are applied to find the optimum values of CNT content, clay content, feed rate and nozzle temperature. Analysis of the printed samples was performed by SEM, TGA, DSC and four-probe tests. Investigation of results declared that by adding the CNT and clay into the PA6, the thermal stability of PA6/CNT/Clay nanocomposites enhanced. The electrical conductivity of the PA6/CNT/Clay nanocomposite exhibited significant improvement by incorporating 1 wt% CNTs and 2 wt% clay nanoparticles. Taguchi method results also showed that the impact of CNT and clay contents on the tensile strength and elongation is greater than the other parameters. The results of optimization by grey relational grade indicated that the tensile strength and elongation of PA6/CNT/Clay nanocomposite can be improved by CNT content of 1 wt%, clay content of 2 wt%, feed rate of 30 mm/s, and nozzle temperature of 270°C.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Examination of electrical conductivity, thermal stability, tensile strength and elongation of PA6/CNT/Clay nanocomposite fabricated by 3D printing
- Date Crossref
- 08/10/2025
- Éditeur
- SAGE Publications
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Rayat Bahra University pays non établi dans la noticeUniversité ou école supérieure
-
Sohar University pays non établi dans la noticeUniversité ou école supérieure
-
Al-Ahliyya Amman University Department of Data Science and Artificial Intelligence pays non établi dans la noticeUniversité ou école supérieure
-
Jain University pays non établi dans la noticeUniversité ou école supérieure
-
Iraqi University pays non établi dans la noticeUniversité ou école supérieure
-
Islamic University pays non établi dans la noticeUniversité ou école supérieure
-
Islamic University of Najaf pays non établi dans la noticeUniversité ou école supérieure
-
Siksha O Anusandhan University pays non établi dans la noticeUniversité ou école supérieure
-
Sathyabama Institute of Science and Technology Department of Mechanical Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Chandigarh University Department of Mechanical Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Uttaranchal University Department of Mechanical Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Chitkara University Outcome pays non établi dans la noticeUniversité ou école supérieure
Rayat Bahra University, Sohar University et Department of Data Science and Artificial Intelligence — Al-Ahliyya Amman University, avec 9 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.