Improving accuracy and aspect ratio of tungsten micro-rods using CS-WEDG
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
For improving accuracy and aspect ratio of micro-rods, a wire electrical discharge grinding method based on controllable slit (CS-WEDG) was proposed. Wire electrode included angle β effectively improves material removal accuracy of micro-rods and makes removal resolution smaller than the feed resolution of motion axis. In addition, the CS-WEDG method has the advantage of being insensitive to the machine tool positioning accuracy. Through experiments, it is found that the wire electrode fluctuation amplitude has a positive correlation with the tension fluctuation rate. The adverse influence of wire electrode fluctuation can be avoided by keeping the wire electrode stationary during finishing. The micro-rod is affected by wire electrode wear (WEW) when fed along the rectangular wave path, resulting in an olive-shaped outline. By optimizing feed path, the inverted triangle feed strategy can compensate for wire electrode wear, which can control the diameter error of micro-rods within ± 1 μm. Through the optimization of feed parameters, the high aspect ratio micro-rod can be fabricated, which has a 48 ± 1 μm diameter with a 33.3 aspect ratio.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Improving accuracy and aspect ratio of tungsten micro-rods using CS-WEDG
- Date Crossref
- 25/09/2025
- Éditeur
- Informa UK Limited
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Shanxi University pays non établi dans la noticeUniversité ou école supérieure
-
Taiyuan University of Science and Technology pays non établi dans la noticeUniversité ou école supérieure
-
Taiyuan University of Technology Key Laboratory of Precision Machining of Shanxi Province pays non établi dans la noticeUniversité ou école supérieure
-
Shanghai Jiao Tong University Hai'an Institute of Intelligent Equipment pays non établi dans la noticeUniversité ou école supérieure
Shanxi University, Taiyuan University of Science and Technology et Key Laboratory of Precision Machining of Shanxi Province — Taiyuan University of Technology, avec 1 autre affiliation.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.