Aller au contenu principal
Accès ouvert déclaré 2025 article

Study on critical power-law singularity of brittle creep failure in deep hole-containing sandstone

1Citations signalées, ce qui n’est pas une note de qualité
3Institutions déclarées
1Pays d’affiliation déclarés

Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

Through the high stress creep test of hole-containing sandstone, the mechanical behavior and deformation response characteristics are analyzed, the critical power law acceleration behavior and parameter variation law are revealed, and the creep failure evaluation index is constructed. The results show that: (1) The creep behavior of hole-containing sandstone is strongly correlated with the load, compared with intact sandstone, εc and t0 are reduced by 1–47% and 9–61%, respectively. (2) Tension cracks appear in hole-containing sandstone, accompanied by particle spalling and hole deformation. The intact sandstone shows tensile-shear composite failure, with brittle sound and particle collapse and accumulation. (3) The stable creep stage (∆t)max, (∆ε)max and accelerated creep stage (∆dε2/dt2)max of hole-containing sandstone are significantly higher than those of intact sandstone. The creep transition stage (∆dε/dt)max is lower than that of intact sandstone. (4) In the power-law acceleration stage, β changes significantly and converges to − 1, which induces damage; the β of the hole-containing sandstone is 2–26% higher than that of the intact sandstone (< − 0.9), but the β of the former is more volatile. At the time of impending disaster (≥ 0.9tf), the (∆t/tf)max and (∆β)max of the hole-containing sandstone are 1.8–2.2 times and 1.3–14.3 times that of the intact sandstone, respectively. 5) Compared with intact sandstone (α < 2), the α value (α > 2) of hole-containing sandstone increases by about 5–19%. The hole-containing sandstone λ is positively correlated with the load and is significantly higher than the intact sandstone.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Study on critical power-law singularity of brittle creep failure in deep hole-containing sandstone
Date Crossref
26/09/2025
Éditeur
Springer Science and Business Media LLC
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Henan Polytechnic University pays non établi dans la notice
    Université ou école supérieure
  • Beijing Jiaotong University pays non établi dans la notice
    Université ou école supérieure
  • China University of Mining and Technology pays non établi dans la notice
    Université ou école supérieure
  • School of Energy Science and Engineering pays non établi dans la notice
    Université ou école supérieure
  • School of Safety Science and Engineering pays non établi dans la notice
    Université ou école supérieure
  • School of Architecture and Design pays non établi dans la notice
    Université ou école supérieure
  • School of Emergency Management and Safety Engineering pays non établi dans la notice
    Université ou école supérieure

Henan Polytechnic University, Beijing Jiaotong University et China University of Mining and Technology, avec 4 autres affiliations.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Rock Mechanics and ModelingGeoscience and Mining TechnologyGeomechanics and Mining Engineering

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.