Time-sharing dual electron beam welding of TC4/T2 Joints: Enhanced mechanical properties due to the optimization of Intermetallics Compounds layer achieved by in-situ remelting
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Time-sharing Dual Electron Beam (TDEB) welding technology was used to process TC4/T2 joint. The key innovation of TDEB lies in its in-situ remelting capability, where a precisely controlled secondary electron beam dynamically remelts the weld pool. This unique feature enables active intervention in the solidification process, effectively breaking up the IMC layer. The in-situ remelting effect of TDEB achieved exceptional control over the detrimental IMCs layer: the thickness of the IMCs layer of the TC4/T2 joint is uneven with the thinnest area is less than 6 μm, and the average thickness is about 10 μm. The TC4/T2 joints exhibited remarkably enhanced mechanical properties, with a tensile strength of more than 240 MPa and a maximum elongation of 26.8 %. The fracture occurred in the heat-affected zone on the copper side. bypassing the typically brittle IMCs/TC4 interface, which indicates the effectiveness of TDEB in suppressing the IMCs layer's detrimental influence. Furthermore, microstructure analysis revealed that the IMCs layer consisted of a unique mixed structure of brittle CuTi and ductile Cu 3 Ti. These ductile Cu 3 Ti play a vital role in impeding crack initiation and propagation.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Time-sharing dual electron beam welding of TC4/T2 Joints: Enhanced mechanical properties due to the optimization of Intermetallics Compounds layer achieved by in-situ remelting
- Date Crossref
- 01/11/2025
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Nanjing University of Science and Technology pays non établi dans la noticeUniversité ou école supérieure
-
Ministry of Industry and Information Technology pays non établi dans la noticeOrganisme public
-
China Electric Equipment Group (China) pays non établi dans la noticeEntreprise
-
Beijing Jingshida Electromechanical Equipment Research Institute pays non établi dans la noticeStructure de recherche
-
Key Laboratory of Controlled Arc Intelligent Additive Manufacturing Technology pays non établi dans la noticeStructure de recherche
-
School of Materials Science and Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Ltd Beijing Xinghang Mechanical-Electric Equipment Co. pays non établi dans la noticeEntreprise
Nanjing University of Science and Technology, Ministry of Industry and Information Technology et China Electric Equipment Group (China), avec 4 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.