Corrosion fatigue mechanisms of high-strength steel wires in the presence of various aggressive ions
Rattachement africain : fr, us. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
This work focuses on the corrosion fatigue of high-strength steel wires with diameters of 200 μm. The fatigue load consists of a bending rotation with a stress amplitude between 1300 MPa and 700 MPa. Various solutions at pH 6 containing either sulfate, a mixture of citrate and either phosphate or hydroxyl are selected to evaluate the role of each ion or their combinations in accelerating the breakdown of the wires. For the higher stress amplitude applied, the lifetime is almost independent of the solution, showing mechanically controlled damage. For the lowest stress amplitude, the corrosion-fatigue limit significantly evolves depending on the solution. Sulfate leads to the shortest lifetimes, whereas experiments performed in deionized water show the longest lifetimes. A combination of citrate with either phosphate or hydroxyl leads to intermediate lifetime. The effect of each ion on the stability of the iron hydroxide oxide and the iron dissolution mechanisms is discussed. The results highlight the role of the chemical affinity of these ions with the iron surface and their consequences in corrosion fatigue crack generation. • Electrochemical instrumentation of a rotating bending setup to record in situ OCP • Ion type in solution plays a significant role in the corrosion fatigue lifetime • The destabilization of the oxide-hydroxide film leads to a lower lifetime • Competition between dihydrogen phosphate and sulfates to adsorb on the surface
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Corrosion fatigue mechanisms of high-strength steel wires in the presence of various aggressive ions
- Date Crossref
- 01/01/2026
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Lyon 1 Université pays non établi dans la noticeUniversité ou école supérieure
-
Michelin (United States) pays non établi dans la noticeEntreprise
-
Centre National de la Recherche Scientifique pays non établi dans la noticeOrganisme public
-
Université Paris-Saclay pays non établi dans la noticeUniversité ou école supérieure
-
Michelin (France) pays non établi dans la noticeEntreprise
-
CentraleSupélec pays non établi dans la noticeStructure de recherche
-
Laboratoire de Mécanique Paris-Saclay pays non établi dans la noticeStructure de recherche
-
Institut National des Sciences Appliquées de Lyon pays non établi dans la noticeUniversité ou école supérieure
-
Université Claude Bernard Lyon 1 INSA de Lyon pays non établi dans la noticeUniversité ou école supérieure
-
Manufacture française des pneumatiques Michelin pays non établi dans la noticeInstitution
Lyon 1 Université, Michelin (United States) et Centre National de la Recherche Scientifique, avec 7 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.