Limit Load Analysis of Pressure Pipes With Partial-Through Circumferential Cracks
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Abstract Limit load predicted by net section collapse criteria (NSC) is usually used to evaluate the residue strength of structures with defects. In this work, the critical bending moment for pressure pipes with circumferential cracks is obtained based on NSC with two different assumptions of neutral axes on cross sections for both thin-walled and thick-walled pipes. For thin-walled cases, it is proved that a simplified model provides critical bending moment expressions the same as the classic solutions that have long been adopted in widely accepted regulations such as ASME and JSME. It also provides results the same as a more rigorous model as long as the relative wall thickness remains small enough. However, the use of the simplified model may lead to an underestimation of the critical bending moment of up to 17% compared to the rigorous model for pressurized thick-walled pipes with long and deep circumferential cracks.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Limit Load Analysis of Pressure Pipes With Partial-Through Circumferential Cracks
- Date Crossref
- 30/09/2025
- Éditeur
- ASME International
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Tianjin University of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Tianjin University pays non établi dans la noticeUniversité ou école supérieure
-
Huazhong University of Science and Technology pays non établi dans la noticeUniversité ou école supérieure
-
School of Chemical Engineering and Technology pays non établi dans la noticeUniversité ou école supérieure
-
School of Aerospace Engineering pays non établi dans la noticeUniversité ou école supérieure
Tianjin University of Technology, Tianjin University et Huazhong University of Science and Technology, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.