Effect of Chemical Etching on the Supercapacitive Performance of Electroless Ni-B Coatings
Rattachement africain : hu, kr. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
In our study, supercapacitor electrodes were prepared by depositing electroless Ni-B coating on copper plates, followed by nitric acid etching. The composition and the micro- and phase structure of the coatings were investigated by ICP-OES, PFIB-SEM, and XRD techniques. The original pebble-like structure of the coating consists of 0.8–10 µm particles, with an X-ray amorphous phase structure. The surface morphology and porosity of the coating can be tuned simply by changing the etching time. The supercapacitive performance of the electrodes was evaluated by means of cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy measurements. The capacitance of the coating was found to vary on the etching time according to a maximum function, allowing for the determination of an optimal duration to obtain a specific capacitance of 157 mF/cm2 (at 0.5 A/g). An excellent charge storage retention of 178% was found after 5000 CV cycles at a scan rate of 50 mV/s owing to the evolved electrochemically active network on the surface of the electrode, indicating a long-term stable and reliable electrode.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Effect of Chemical Etching on the Supercapacitive Performance of Electroless Ni-B Coatings
- Date Crossref
- 29/07/2025
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
University of Miskolc Institute of Physical Metallurgy pays non établi dans la noticeUniversité ou école supérieure
-
HUN-REN Research Centre for Natural Sciences pays non établi dans la noticeStructure de recherche
-
Eötvös Loránd University Department of Materials Physics pays non établi dans la noticeUniversité ou école supérieure
-
Bay Zoltán Foundation for Applied Research pays non établi dans la noticeOrganisation à but non lucratif
-
Chung-Ang University pays non établi dans la noticeUniversité ou école supérieure
-
HUN-REN Natural Sciences Research Centre pays non établi dans la noticeStructure de recherche
-
Bay Zoltán Nonprofit Ltd. for Applied Research pays non établi dans la noticeEntreprise
-
School of Integrative Engineering pays non établi dans la noticeUniversité ou école supérieure
Institute of Physical Metallurgy — University of Miskolc, HUN-REN Research Centre for Natural Sciences et Department of Materials Physics — Eötvös Loránd University, avec 5 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.