Formation of Intermetallic Coatings on Titanium by Explosive Welding and Subsequent Heat Treatment of the Layered Metal Composite
Rattachement africain : ru. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
An approach for the formation of intermetallic coatings on the titanium surface based on titanium aluminides is proposed. The approach involves producing a layered steel-aluminum-titanium metal composite via explosive welding, followed by heat treatment to form a diffusion zone at the steel–aluminum interface with a thickness of more than 30 μm, sufficient for the spontaneous separation of the steel layer. As a result, an aluminum layer approximately 0.3 mm thick remains on the titanium surface. Subsequent heating at temperatures of 700–850 °C, below the allotropic transformation temperature of titanium, results in the transformation of the aluminum layer into titanium aluminides. The formation of the intermetallic coating structure occurs as a result of the upward transportation of TiAl3 fragments separated from the reaction zone by circulating melt flows. With increasing heat treatment time, these fragments become separated by the Al2O3 oxide phase.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Formation of Intermetallic Coatings on Titanium by Explosive Welding and Subsequent Heat Treatment of the Layered Metal Composite
- Date Crossref
- 21/07/2025
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Volgograd State Technical University Materials Science and Composite Materials Department pays non établi dans la noticeUniversité ou école supérieure
-
Scientific Research and Design Institute of Technology Equipment Refining and Petrochemical Industries pays non établi dans la noticeStructure de recherche
-
Design and Technological Institute of Oil Refining and Petrochemical Equipment pays non établi dans la noticeStructure de recherche
Materials Science and Composite Materials Department — Volgograd State Technical University, Scientific Research and Design Institute of Technology Equipment Refining and Petrochemical Industries et Design and Technological Institute of Oil Refining and Petrochemical Equipment.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.